// SPDX-License-Identifier: GPL-2.0-only/* * Copyright 2002-2005, Instant802 Networks, Inc. * Copyright 2005-2006, Devicescape Software, Inc. * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2018-2026 Intel Corporation * * Transmit and frame generation functions. */ #include <linux/kernel.h>#include <linux/slab.h>#include <linux/skbuff.h>#include <linux/if_vlan.h>#include <linux/etherdevice.h>#include <linux/bitmap.h>#include <linux/rcupdate.h>#include <linux/export.h>#include <net/net_namespace.h>#include <net/ieee80211_radiotap.h>#include <net/cfg80211.h>#include <net/mac80211.h>#include <net/codel.h>#include <net/codel_impl.h>#include <linux/unaligned.h>#include <net/fq_impl.h>#include <net/sock.h>#include <net/gso.h> #include "ieee80211_i.h"#include "driver-ops.h"#include "led.h"#include "mesh.h"#include "wep.h"#include "wpa.h"#include "wme.h"#include "rate.h" /* misc utils */ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, struct sk_buff *skb, int group_addr, int next_frag_len){ int rate, mrate, erp, dur, i; struct ieee80211_rate *txrate; struct ieee80211_local *local = tx->local; struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); /* assume HW handles this */ if (tx->rate.flags & (IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS)) return 0; /* uh huh? */ if (WARN_ON_ONCE(tx->rate.idx < 0)) return 0; if (info->band >= NUM_NL80211_BANDS) return 0; sband = local->hw.wiphy->bands[info->band]; txrate = &sband->bitrates[tx->rate.idx]; erp = txrate->flags & IEEE80211_RATE_ERP_G; /* device is expected to do this */ if (sband->band == NL80211_BAND_S1GHZ) return 0; /* * data and mgmt (except PS Poll): * - during CFP: 32768 * - during contention period: * if addr1 is group address: 0 * if more fragments = 0 and addr1 is individual address: time to * transmit one ACK plus SIFS * if more fragments = 1 and addr1 is individual address: time to * transmit next fragment plus 2 x ACK plus 3 x SIFS * * IEEE 802.11, 9.6: * - control response frame (CTS or ACK) shall be transmitted using the * same rate as the immediately previous frame in the frame exchange * sequence, if this rate belongs to the PHY mandatory rates, or else * at the highest possible rate belonging to the PHY rates in the * BSSBasicRateSet */ hdr = (struct ieee80211_hdr *)skb->data; if (ieee80211_is_ctl(hdr->frame_control)) { /* TODO: These control frames are not currently sent by * mac80211, but should they be implemented, this function * needs to be updated to support duration field calculation. * * RTS: time needed to transmit pending data/mgmt frame plus * one CTS frame plus one ACK frame plus 3 x SIFS * CTS: duration of immediately previous RTS minus time * required to transmit CTS and its SIFS * ACK: 0 if immediately previous directed data/mgmt had * more=0, with more=1 duration in ACK frame is duration * from previous frame minus time needed to transmit ACK * and its SIFS * PS Poll: BIT(15) | BIT(14) | aid */ return 0; } /* data/mgmt */ if (0 /* FIX: data/mgmt during CFP */) return cpu_to_le16(32768); if (group_addr) /* Group address as the destination - no ACK */ return 0; /* Individual destination address: * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes) * CTS and ACK frames shall be transmitted using the highest rate in * basic rate set that is less than or equal to the rate of the * immediately previous frame and that is using the same modulation * (CCK or OFDM). If no basic rate set matches with these requirements, * the highest mandatory rate of the PHY that is less than or equal to * the rate of the previous frame is used. * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps */ rate = -1; /* use lowest available if everything fails */ mrate = sband->bitrates[0].bitrate; for (i = 0; i < sband->n_bitrates; i++) { struct ieee80211_rate *r = &sband->bitrates[i]; u32 flag; if (r->bitrate > txrate->bitrate) break; if (tx->sdata->vif.bss_conf.basic_rates & BIT(i)) rate = r->bitrate; switch (sband->band) { case NL80211_BAND_2GHZ: case NL80211_BAND_LC: if (tx->sdata->deflink.operating_11g_mode) flag = IEEE80211_RATE_MANDATORY_G; else flag = IEEE80211_RATE_MANDATORY_B; break; case NL80211_BAND_5GHZ: case NL80211_BAND_6GHZ: flag = IEEE80211_RATE_MANDATORY_A; break; default: flag = 0; WARN_ON(1); break; } if (r->flags & flag) mrate = r->bitrate; } if (rate == -1) { /* No matching basic rate found; use highest suitable mandatory * PHY rate */ rate = mrate; } /* Don't calculate ACKs for QoS Frames with NoAck Policy set */ if (ieee80211_is_data_qos(hdr->frame_control) && *(ieee80211_get_qos_ctl(hdr)) & IEEE80211_QOS_CTL_ACK_POLICY_NOACK) dur = 0; else /* Time needed to transmit ACK * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up * to closest integer */ dur = ieee80211_frame_duration(sband->band, 10, rate, erp, tx->sdata->vif.bss_conf.use_short_preamble); if (next_frag_len) { /* Frame is fragmented: duration increases with time needed to * transmit next fragment plus ACK and 2 x SIFS. */ dur *= 2; /* ACK + SIFS */ /* next fragment */ dur += ieee80211_frame_duration(sband->band, next_frag_len, txrate->bitrate, erp, tx->sdata->vif.bss_conf.use_short_preamble); } return cpu_to_le16(dur);} /* tx handlers */static ieee80211_tx_result debug_noinlineieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data *tx){ struct ieee80211_local *local = tx->local; struct ieee80211_if_managed *ifmgd; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); /* driver doesn't support power save */ if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) return TX_CONTINUE; /* hardware does dynamic power save */ if (ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) return TX_CONTINUE; /* dynamic power save disabled */ if (local->hw.conf.dynamic_ps_timeout <= 0) return TX_CONTINUE; /* we are scanning, don't enable power save */ if (local->scanning) return TX_CONTINUE; if (!local->ps_sdata) return TX_CONTINUE; /* No point if we're going to suspend */ if (local->quiescing) return TX_CONTINUE; /* dynamic ps is supported only in managed mode */ if (tx->sdata->vif.type != NL80211_IFTYPE_STATION) return TX_CONTINUE; if (unlikely(info->flags & IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) return TX_CONTINUE; ifmgd = &tx->sdata->u.mgd; /* * Don't wakeup from power save if u-apsd is enabled, voip ac has * u-apsd enabled and the frame is in voip class. This effectively * means that even if all access categories have u-apsd enabled, in * practise u-apsd is only used with the voip ac. This is a * workaround for the case when received voip class packets do not * have correct qos tag for some reason, due the network or the * peer application. * * Note: ifmgd->uapsd_queues access is racy here. If the value is * changed via debugfs, user needs to reassociate manually to have * everything in sync. */ if ((ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) && (ifmgd->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) && skb_get_queue_mapping(tx->skb) == IEEE80211_AC_VO) return TX_CONTINUE; if (local->hw.conf.flags & IEEE80211_CONF_PS) { ieee80211_stop_queues_by_reason(&local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_PS, false); ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; wiphy_work_queue(local->hw.wiphy, &local->dynamic_ps_disable_work); } /* Don't restart the timer if we're not disassociated */ if (!ifmgd->associated) return TX_CONTINUE; mod_timer(&local->dynamic_ps_timer, jiffies + msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout)); return TX_CONTINUE;} static ieee80211_tx_result debug_noinlineieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx){ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); bool assoc = false; if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) return TX_CONTINUE; if (unlikely(test_bit(SCAN_SW_SCANNING, &tx->local->scanning)) && test_bit(SDATA_STATE_OFFCHANNEL, &tx->sdata->state) && !ieee80211_is_probe_req(hdr->frame_control) && !ieee80211_is_any_nullfunc(hdr->frame_control)) /* * When software scanning only nullfunc frames (to notify * the sleep state to the AP) and probe requests (for the * active scan) are allowed, all other frames should not be * sent and we should not get here, but if we do * nonetheless, drop them to avoid sending them * off-channel. See __ieee80211_start_scan() for more. */ return TX_DROP; if (tx->sdata->vif.type == NL80211_IFTYPE_OCB) return TX_CONTINUE; if (tx->flags & IEEE80211_TX_PS_BUFFERED) return TX_CONTINUE; if (tx->sta) assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); if (likely(tx->flags & IEEE80211_TX_UNICAST)) { if (unlikely(!assoc && ieee80211_is_data(hdr->frame_control))) {#ifdef CONFIG_MAC80211_VERBOSE_DEBUG sdata_info(tx->sdata, "dropped data frame to not associated station %pM\n", hdr->addr1);#endif I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc); return TX_DROP; } } else if (unlikely(ieee80211_is_data(hdr->frame_control) && ieee80211_vif_get_num_mcast_if(tx->sdata) == 0)) { /* * No associated STAs - no need to send multicast * frames. */ return TX_DROP; } return TX_CONTINUE;} /* This function is called whenever the AP is about to exceed the maximum limit * of buffered frames for power saving STAs. This situation should not really * happen often during normal operation, so dropping the oldest buffered packet * from each queue should be OK to make some room for new frames. */static void purge_old_ps_buffers(struct ieee80211_local *local){ int total = 0, purged = 0; struct sk_buff *skb; struct ieee80211_sub_if_data *sdata; struct sta_info *sta; list_for_each_entry_rcu(sdata, &local->interfaces, list) { struct ps_data *ps; if (sdata->vif.type == NL80211_IFTYPE_AP) ps = &sdata->u.ap.ps; else if (ieee80211_vif_is_mesh(&sdata->vif)) ps = &sdata->u.mesh.ps; else continue; skb = skb_dequeue(&ps->bc_buf); if (skb) { purged++; ieee80211_free_txskb(&local->hw, skb); } total += skb_queue_len(&ps->bc_buf); } /* * Drop one frame from each station from the lowest-priority * AC that has frames at all. */ list_for_each_entry_rcu(sta, &local->sta_list, list) { int ac; for (ac = IEEE80211_AC_BK; ac >= IEEE80211_AC_VO; ac--) { skb = skb_dequeue(&sta->ps_tx_buf[ac]); total += skb_queue_len(&sta->ps_tx_buf[ac]); if (skb) { purged++; ieee80211_free_txskb(&local->hw, skb); break; } } } local->total_ps_buffered = total; ps_dbg_hw(&local->hw, "PS buffers full - purged %d frames\n", purged);} static ieee80211_tx_resultieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx){ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; struct ps_data *ps; /* * broadcast/multicast frame * * If any of the associated/peer stations is in power save mode, * the frame is buffered to be sent after DTIM beacon frame. * This is done either by the hardware or us. */ /* powersaving STAs currently only in AP/VLAN/mesh mode */ if (tx->sdata->vif.type == NL80211_IFTYPE_AP || tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { if (!tx->sdata->bss) return TX_CONTINUE; ps = &tx->sdata->bss->ps; } else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) { ps = &tx->sdata->u.mesh.ps; } else { return TX_CONTINUE; } /* no buffering for ordered frames */ if (ieee80211_has_order(hdr->frame_control)) return TX_CONTINUE; if (ieee80211_is_probe_req(hdr->frame_control)) return TX_CONTINUE; if (ieee80211_hw_check(&tx->local->hw, QUEUE_CONTROL)) info->hw_queue = tx->sdata->vif.cab_queue; /* no stations in PS mode and no buffered packets */ if (!atomic_read(&ps->num_sta_ps) && skb_queue_empty(&ps->bc_buf)) return TX_CONTINUE; info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM; /* device releases frame after DTIM beacon */ if (!ieee80211_hw_check(&tx->local->hw, HOST_BROADCAST_PS_BUFFERING)) return TX_CONTINUE; /* buffered in mac80211 */ if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) purge_old_ps_buffers(tx->local); if (skb_queue_len(&ps->bc_buf) >= AP_MAX_BC_BUFFER) { ps_dbg(tx->sdata, "BC TX buffer full - dropping the oldest frame\n"); ieee80211_free_txskb(&tx->local->hw, skb_dequeue(&ps->bc_buf)); } else tx->local->total_ps_buffered++; skb_queue_tail(&ps->bc_buf, tx->skb); return TX_QUEUED;} static int ieee80211_use_mfp(__le16 fc, struct sta_info *sta, struct sk_buff *skb){ if (!ieee80211_is_mgmt(fc)) return 0; if (sta == NULL || !test_sta_flag(sta, WLAN_STA_MFP)) return 0; if (!ieee80211_is_robust_mgmt_frame(skb)) return 0; return 1;} static ieee80211_tx_resultieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx){ struct sta_info *sta = tx->sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; struct ieee80211_local *local = tx->local; if (unlikely(!sta)) return TX_CONTINUE; if (unlikely((test_sta_flag(sta, WLAN_STA_PS_STA) || test_sta_flag(sta, WLAN_STA_PS_DRIVER) || test_sta_flag(sta, WLAN_STA_PS_DELIVER)) && !(info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER))) { int ac = skb_get_queue_mapping(tx->skb); if (ieee80211_is_mgmt(hdr->frame_control) && !ieee80211_is_bufferable_mmpdu(tx->skb)) { info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; return TX_CONTINUE; } ps_dbg(sta->sdata, "STA %pM aid %d: PS buffer for AC %d\n", sta->sta.addr, sta->sta.aid, ac); if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) purge_old_ps_buffers(tx->local); /* sync with ieee80211_sta_ps_deliver_wakeup */ spin_lock(&sta->ps_lock); /* * STA woke up the meantime and all the frames on ps_tx_buf have * been queued to pending queue. No reordering can happen, go * ahead and Tx the packet. */ if (!test_sta_flag(sta, WLAN_STA_PS_STA) && !test_sta_flag(sta, WLAN_STA_PS_DRIVER) && !test_sta_flag(sta, WLAN_STA_PS_DELIVER)) { spin_unlock(&sta->ps_lock); return TX_CONTINUE; } if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) { struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]);Lines 1–500 of 6668. Load more
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2002-2005, Instant802 Networks, Inc. * Copyright 2005-2006, Devicescape Software, Inc. * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2018-2026 Intel Corporation * * Transmit and frame generation functions. */ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/skbuff.h> #include <linux/if_vlan.h> #include <linux/etherdevice.h> #include <linux/bitmap.h> #include <linux/rcupdate.h> #include <linux/export.h> #include <net/net_namespace.h> #include <net/ieee80211_radiotap.h> #include <net/cfg80211.h> #include <net/mac80211.h> #include <net/codel.h> #include <net/codel_impl.h> #include <linux/unaligned.h> #include <net/fq_impl.h> #include <net/sock.h> #include <net/gso.h> #include "ieee80211_i.h" #include "driver-ops.h" #include "led.h" #include "mesh.h" #include "wep.h" #include "wpa.h" #include "wme.h" #include "rate.h" /* misc utils */ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, struct sk_buff *skb, int group_addr, int next_frag_len) { int rate, mrate, erp, dur, i; struct ieee80211_rate *txrate; struct ieee80211_local *local = tx->local; struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); /* assume HW handles this */ if (tx->rate.flags & (IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS)) return 0; /* uh huh? */ if (WARN_ON_ONCE(tx->rate.idx < 0)) return 0; if (info->band >= NUM_NL80211_BANDS) return 0; sband = local->hw.wiphy->bands[info->band]; txrate = &sband->bitrates[tx->rate.idx]; erp = txrate->flags & IEEE80211_RATE_ERP_G; /* device is expected to do this */ if (sband->band == NL80211_BAND_S1GHZ) return 0; /* * data and mgmt (except PS Poll): * - during CFP: 32768 * - during contention period: * if addr1 is group address: 0 * if more fragments = 0 and addr1 is individual address: time to * transmit one ACK plus SIFS * if more fragments = 1 and addr1 is individual address: time to * transmit next fragment plus 2 x ACK plus 3 x SIFS * * IEEE 802.11, 9.6: * - control response frame (CTS or ACK) shall be transmitted using the * same rate as the immediately previous frame in the frame exchange * sequence, if this rate belongs to the PHY mandatory rates, or else * at the highest possible rate belonging to the PHY rates in the * BSSBasicRateSet */ hdr = (struct ieee80211_hdr *)skb->data; if (ieee80211_is_ctl(hdr->frame_control)) { /* TODO: These control frames are not currently sent by * mac80211, but should they be implemented, this function * needs to be updated to support duration field calculation. * * RTS: time needed to transmit pending data/mgmt frame plus * one CTS frame plus one ACK frame plus 3 x SIFS * CTS: duration of immediately previous RTS minus time * required to transmit CTS and its SIFS * ACK: 0 if immediately previous directed data/mgmt had * more=0, with more=1 duration in ACK frame is duration * from previous frame minus time needed to transmit ACK * and its SIFS * PS Poll: BIT(15) | BIT(14) | aid */ return 0; } /* data/mgmt */ if (0 /* FIX: data/mgmt during CFP */) return cpu_to_le16(32768); if (group_addr) /* Group address as the destination - no ACK */ return 0; /* Individual destination address: * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes) * CTS and ACK frames shall be transmitted using the highest rate in * basic rate set that is less than or equal to the rate of the * immediately previous frame and that is using the same modulation * (CCK or OFDM). If no basic rate set matches with these requirements, * the highest mandatory rate of the PHY that is less than or equal to * the rate of the previous frame is used. * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps */ rate = -1; /* use lowest available if everything fails */ mrate = sband->bitrates[0].bitrate; for (i = 0; i < sband->n_bitrates; i++) { struct ieee80211_rate *r = &sband->bitrates[i]; u32 flag; if (r->bitrate > txrate->bitrate) break; if (tx->sdata->vif.bss_conf.basic_rates & BIT(i)) rate = r->bitrate; switch (sband->band) { case NL80211_BAND_2GHZ: case NL80211_BAND_LC: if (tx->sdata->deflink.operating_11g_mode) flag = IEEE80211_RATE_MANDATORY_G; else flag = IEEE80211_RATE_MANDATORY_B; break; case NL80211_BAND_5GHZ: case NL80211_BAND_6GHZ: flag = IEEE80211_RATE_MANDATORY_A; break; default: flag = 0; WARN_ON(1); break; } if (r->flags & flag) mrate = r->bitrate; } if (rate == -1) { /* No matching basic rate found; use highest suitable mandatory * PHY rate */ rate = mrate; } /* Don't calculate ACKs for QoS Frames with NoAck Policy set */ if (ieee80211_is_data_qos(hdr->frame_control) && *(ieee80211_get_qos_ctl(hdr)) & IEEE80211_QOS_CTL_ACK_POLICY_NOACK) dur = 0; else /* Time needed to transmit ACK * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up * to closest integer */ dur = ieee80211_frame_duration(sband->band, 10, rate, erp, tx->sdata->vif.bss_conf.use_short_preamble); if (next_frag_len) { /* Frame is fragmented: duration increases with time needed to * transmit next fragment plus ACK and 2 x SIFS. */ dur *= 2; /* ACK + SIFS */ /* next fragment */ dur += ieee80211_frame_duration(sband->band, next_frag_len, txrate->bitrate, erp, tx->sdata->vif.bss_conf.use_short_preamble); } return cpu_to_le16(dur); } /* tx handlers */ static ieee80211_tx_result debug_noinline ieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data *tx) { struct ieee80211_local *local = tx->local; struct ieee80211_if_managed *ifmgd; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); /* driver doesn't support power save */ if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) return TX_CONTINUE; /* hardware does dynamic power save */ if (ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) return TX_CONTINUE; /* dynamic power save disabled */ if (local->hw.conf.dynamic_ps_timeout <= 0) return TX_CONTINUE; /* we are scanning, don't enable power save */ if (local->scanning) return TX_CONTINUE; if (!local->ps_sdata) return TX_CONTINUE; /* No point if we're going to suspend */ if (local->quiescing) return TX_CONTINUE; /* dynamic ps is supported only in managed mode */ if (tx->sdata->vif.type != NL80211_IFTYPE_STATION) return TX_CONTINUE; if (unlikely(info->flags & IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) return TX_CONTINUE; ifmgd = &tx->sdata->u.mgd; /* * Don't wakeup from power save if u-apsd is enabled, voip ac has * u-apsd enabled and the frame is in voip class. This effectively * means that even if all access categories have u-apsd enabled, in * practise u-apsd is only used with the voip ac. This is a * workaround for the case when received voip class packets do not * have correct qos tag for some reason, due the network or the * peer application. * * Note: ifmgd->uapsd_queues access is racy here. If the value is * changed via debugfs, user needs to reassociate manually to have * everything in sync. */ if ((ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) && (ifmgd->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) && skb_get_queue_mapping(tx->skb) == IEEE80211_AC_VO) return TX_CONTINUE; if (local->hw.conf.flags & IEEE80211_CONF_PS) { ieee80211_stop_queues_by_reason(&local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_PS, false); ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; wiphy_work_queue(local->hw.wiphy, &local->dynamic_ps_disable_work); } /* Don't restart the timer if we're not disassociated */ if (!ifmgd->associated) return TX_CONTINUE; mod_timer(&local->dynamic_ps_timer, jiffies + msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout)); return TX_CONTINUE; } static ieee80211_tx_result debug_noinline ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); bool assoc = false; if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) return TX_CONTINUE; if (unlikely(test_bit(SCAN_SW_SCANNING, &tx->local->scanning)) && test_bit(SDATA_STATE_OFFCHANNEL, &tx->sdata->state) && !ieee80211_is_probe_req(hdr->frame_control) && !ieee80211_is_any_nullfunc(hdr->frame_control)) /* * When software scanning only nullfunc frames (to notify * the sleep state to the AP) and probe requests (for the * active scan) are allowed, all other frames should not be * sent and we should not get here, but if we do * nonetheless, drop them to avoid sending them * off-channel. See __ieee80211_start_scan() for more. */ return TX_DROP; if (tx->sdata->vif.type == NL80211_IFTYPE_OCB) return TX_CONTINUE; if (tx->flags & IEEE80211_TX_PS_BUFFERED) return TX_CONTINUE; if (tx->sta) assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); if (likely(tx->flags & IEEE80211_TX_UNICAST)) { if (unlikely(!assoc && ieee80211_is_data(hdr->frame_control))) { #ifdef CONFIG_MAC80211_VERBOSE_DEBUG sdata_info(tx->sdata, "dropped data frame to not associated station %pM\n", hdr->addr1); #endif I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc); return TX_DROP; } } else if (unlikely(ieee80211_is_data(hdr->frame_control) && ieee80211_vif_get_num_mcast_if(tx->sdata) == 0)) { /* * No associated STAs - no need to send multicast * frames. */ return TX_DROP; } return TX_CONTINUE; } /* This function is called whenever the AP is about to exceed the maximum limit * of buffered frames for power saving STAs. This situation should not really * happen often during normal operation, so dropping the oldest buffered packet * from each queue should be OK to make some room for new frames. */ static void purge_old_ps_buffers(struct ieee80211_local *local) { int total = 0, purged = 0; struct sk_buff *skb; struct ieee80211_sub_if_data *sdata; struct sta_info *sta; list_for_each_entry_rcu(sdata, &local->interfaces, list) { struct ps_data *ps; if (sdata->vif.type == NL80211_IFTYPE_AP) ps = &sdata->u.ap.ps; else if (ieee80211_vif_is_mesh(&sdata->vif)) ps = &sdata->u.mesh.ps; else continue; skb = skb_dequeue(&ps->bc_buf); if (skb) { purged++; ieee80211_free_txskb(&local->hw, skb); } total += skb_queue_len(&ps->bc_buf); } /* * Drop one frame from each station from the lowest-priority * AC that has frames at all. */ list_for_each_entry_rcu(sta, &local->sta_list, list) { int ac; for (ac = IEEE80211_AC_BK; ac >= IEEE80211_AC_VO; ac--) { skb = skb_dequeue(&sta->ps_tx_buf[ac]); total += skb_queue_len(&sta->ps_tx_buf[ac]); if (skb) { purged++; ieee80211_free_txskb(&local->hw, skb); break; } } } local->total_ps_buffered = total; ps_dbg_hw(&local->hw, "PS buffers full - purged %d frames\n", purged); } static ieee80211_tx_result ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; struct ps_data *ps; /* * broadcast/multicast frame * * If any of the associated/peer stations is in power save mode, * the frame is buffered to be sent after DTIM beacon frame. * This is done either by the hardware or us. */ /* powersaving STAs currently only in AP/VLAN/mesh mode */ if (tx->sdata->vif.type == NL80211_IFTYPE_AP || tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { if (!tx->sdata->bss) return TX_CONTINUE; ps = &tx->sdata->bss->ps; } else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) { ps = &tx->sdata->u.mesh.ps; } else { return TX_CONTINUE; } /* no buffering for ordered frames */ if (ieee80211_has_order(hdr->frame_control)) return TX_CONTINUE; if (ieee80211_is_probe_req(hdr->frame_control)) return TX_CONTINUE; if (ieee80211_hw_check(&tx->local->hw, QUEUE_CONTROL)) info->hw_queue = tx->sdata->vif.cab_queue; /* no stations in PS mode and no buffered packets */ if (!atomic_read(&ps->num_sta_ps) && skb_queue_empty(&ps->bc_buf)) return TX_CONTINUE; info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM; /* device releases frame after DTIM beacon */ if (!ieee80211_hw_check(&tx->local->hw, HOST_BROADCAST_PS_BUFFERING)) return TX_CONTINUE; /* buffered in mac80211 */ if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) purge_old_ps_buffers(tx->local); if (skb_queue_len(&ps->bc_buf) >= AP_MAX_BC_BUFFER) { ps_dbg(tx->sdata, "BC TX buffer full - dropping the oldest frame\n"); ieee80211_free_txskb(&tx->local->hw, skb_dequeue(&ps->bc_buf)); } else tx->local->total_ps_buffered++; skb_queue_tail(&ps->bc_buf, tx->skb); return TX_QUEUED; } static int ieee80211_use_mfp(__le16 fc, struct sta_info *sta, struct sk_buff *skb) { if (!ieee80211_is_mgmt(fc)) return 0; if (sta == NULL || !test_sta_flag(sta, WLAN_STA_MFP)) return 0; if (!ieee80211_is_robust_mgmt_frame(skb)) return 0; return 1; } static ieee80211_tx_result ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) { struct sta_info *sta = tx->sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; struct ieee80211_local *local = tx->local; if (unlikely(!sta)) return TX_CONTINUE; if (unlikely((test_sta_flag(sta, WLAN_STA_PS_STA) || test_sta_flag(sta, WLAN_STA_PS_DRIVER) || test_sta_flag(sta, WLAN_STA_PS_DELIVER)) && !(info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER))) { int ac = skb_get_queue_mapping(tx->skb); if (ieee80211_is_mgmt(hdr->frame_control) && !ieee80211_is_bufferable_mmpdu(tx->skb)) { info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; return TX_CONTINUE; } ps_dbg(sta->sdata, "STA %pM aid %d: PS buffer for AC %d\n", sta->sta.addr, sta->sta.aid, ac); if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) purge_old_ps_buffers(tx->local); /* sync with ieee80211_sta_ps_deliver_wakeup */ spin_lock(&sta->ps_lock); /* * STA woke up the meantime and all the frames on ps_tx_buf have * been queued to pending queue. No reordering can happen, go * ahead and Tx the packet. */ if (!test_sta_flag(sta, WLAN_STA_PS_STA) && !test_sta_flag(sta, WLAN_STA_PS_DRIVER) && !test_sta_flag(sta, WLAN_STA_PS_DELIVER)) { spin_unlock(&sta->ps_lock); return TX_CONTINUE; } if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) { struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]);