# SPDX-License-Identifier: GPL-2.0-only## Input misc drivers configuration#menuconfig INPUT_MISC bool "Miscellaneous devices" help Say Y here, and a list of miscellaneous input drivers will be displayed. Everything that didn't fit into the other categories is here. This option doesn't affect the kernel. If unsure, say Y. if INPUT_MISC config INPUT_88PM860X_ONKEY tristate "88PM860x ONKEY support" depends on MFD_88PM860X help Support the ONKEY of Marvell 88PM860x PMICs as an input device reporting power button status. To compile this driver as a module, choose M here: the module will be called 88pm860x_onkey. config INPUT_88PM80X_ONKEY tristate "88PM80x ONKEY support" depends on MFD_88PM800 help Support the ONKEY of Marvell 88PM80x PMICs as an input device reporting power button status. To compile this driver as a module, choose M here: the module will be called 88pm80x_onkey. config INPUT_88PM886_ONKEY tristate "Marvell 88PM886 onkey support" depends on MFD_88PM886_PMIC help Support the onkey of Marvell 88PM886 PMIC as an input device reporting power button status. config INPUT_AB8500_PONKEY tristate "AB8500 Pon (PowerOn) Key" depends on AB8500_CORE help Say Y here to use the PowerOn Key for ST-Ericsson's AB8500 Mix-Sig PMIC. To compile this driver as a module, choose M here: the module will be called ab8500-ponkey. config INPUT_AD714X tristate "Analog Devices AD714x Capacitance Touch Sensor" help Say Y here if you want to support an AD7142/3/7/8/7A touch sensor. You should select a bus connection too. To compile this driver as a module, choose M here: the module will be called ad714x. config INPUT_AD714X_I2C tristate "support I2C bus connection" depends on INPUT_AD714X && I2C default y help Say Y here if you have AD7142/AD7147 hooked to an I2C bus. To compile this driver as a module, choose M here: the module will be called ad714x-i2c. config INPUT_AD714X_SPI tristate "support SPI bus connection" depends on INPUT_AD714X && SPI default y help Say Y here if you have AD7142/AD7147 hooked to a SPI bus. To compile this driver as a module, choose M here: the module will be called ad714x-spi. config INPUT_ARIEL_PWRBUTTON tristate "Dell Wyse 3020 Power Button Driver" depends on SPI depends on MACH_MMP3_DT || COMPILE_TEST help Say Y to enable support for reporting power button status on on Dell Wyse 3020 ("Ariel") thin client. To compile this driver as a module, choose M here: the module will be called ariel-pwrbutton. config INPUT_ARIZONA_HAPTICS tristate "Arizona haptics support" depends on MFD_ARIZONA && SND_SOC select INPUT_FF_MEMLESS help Say Y to enable support for the haptics module in Arizona CODECs. To compile this driver as a module, choose M here: the module will be called arizona-haptics. config INPUT_ATC260X_ONKEY tristate "Actions Semi ATC260x PMIC ONKEY" depends on MFD_ATC260X help Support the ONKEY of ATC260x PMICs as an input device reporting power button status. ONKEY can be used to wakeup from low power modes and force a reset on long press. To compile this driver as a module, choose M here: the module will be called atc260x-onkey. config INPUT_ATMEL_CAPTOUCH tristate "Atmel Capacitive Touch Button Driver" depends on OF depends on I2C help Say Y here if an Atmel Capacitive Touch Button device which implements "captouch" protocol is connected to I2C bus. Typically this device consists of Atmel Touch sensor controlled by AtMegaXX MCU running firmware based on Qtouch library. One should find "atmel,captouch" node in the board specific DTS. To compile this driver as a module, choose M here: the module will be called atmel_captouch. config INPUT_AW86927 tristate "Awinic AW86927 Haptic Driver Support" depends on I2C && INPUT select INPUT_FF_MEMLESS select REGMAP_I2C help Say Y here if you have an Awinic AW86927 haptic chip. To compile this driver as a module, choose M here: the module will be called aw86927. config INPUT_BBNSM_PWRKEY tristate "NXP BBNSM Power Key Driver" depends on ARCH_MXC || COMPILE_TEST depends on OF help This is the bbnsm powerkey driver for the NXP i.MX application processors. To compile this driver as a module, choose M here; the module will be called bbnsm_pwrkey. config INPUT_BMA150 tristate "BMA150/SMB380 acceleration sensor support" depends on I2C help Say Y here if you have Bosch Sensortec's BMA150 or SMB380 acceleration sensor hooked to an I2C bus. To compile this driver as a module, choose M here: the module will be called bma150. config INPUT_CS40L50_VIBRA tristate "CS40L50 Haptic Driver support" depends on MFD_CS40L50_CORE help Say Y here to enable support for Cirrus Logic's CS40L50 haptic driver. To compile this driver as a module, choose M here: the module will be called cs40l50-vibra. config INPUT_E3X0_BUTTON tristate "NI Ettus Research USRP E3xx Button support." default n help Say Y here to enable support for the NI Ettus Research USRP E3xx Button. To compile this driver as a module, choose M here: the module will be called e3x0_button. config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM help Say Y here if you want the standard PC Speaker to be used for bells and whistles. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called pcspkr. config INPUT_PF1550_ONKEY tristate "NXP PF1550 Onkey support" depends on MFD_PF1550 help Say Y here if you want support for PF1550 PMIC. Onkey can trigger release and 1s(push hold), 2s, 3s, 4s, 8s interrupt for long press detect. To compile this driver as a module, choose M here. The module will be called pf1550-onkey. config INPUT_PM8941_PWRKEY tristate "Qualcomm PM8941 power key support" depends on MFD_SPMI_PMIC help Say Y here if you want support for the power key usually found on boards using a Qualcomm PM8941 compatible PMIC. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called pm8941-pwrkey. config INPUT_PM8XXX_VIBRATOR tristate "Qualcomm PM8XXX vibrator support" depends on MFD_PM8XXX || MFD_SPMI_PMIC select INPUT_FF_MEMLESS help This option enables device driver support for the vibrator on Qualcomm PM8xxx chip. This driver supports ff-memless interface from input framework. To compile this driver as module, choose M here: the module will be called pm8xxx-vibrator. config INPUT_PMIC8XXX_PWRKEY tristate "PMIC8XXX power key support" depends on MFD_PM8XXX help Say Y here if you want support for the PMIC8XXX power key. If unsure, say N. To compile this driver as a module, choose M here: the module will be called pmic8xxx-pwrkey. config INPUT_SPARCSPKR tristate "SPARC Speaker support" depends on PCI && SPARC64 help Say Y here if you want the standard Speaker on Sparc PCI systems to be used for bells and whistles. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called sparcspkr. config INPUT_M68K_BEEP tristate "M68k Beeper support" depends on M68K config INPUT_MAX7360_ROTARY tristate "Maxim MAX7360 Rotary Encoder" depends on MFD_MAX7360 help If you say yes here you get support for the rotary encoder on the Maxim MAX7360 I/O Expander. To compile this driver as a module, choose M here: the module will be called max7360_rotary. config INPUT_MAX77650_ONKEY tristate "Maxim MAX77650 ONKEY support" depends on MFD_MAX77650 help Support the ONKEY of the MAX77650 PMIC as an input device. To compile this driver as a module, choose M here: the module will be called max77650-onkey. config INPUT_MAX77693_HAPTIC tristate "MAXIM MAX77693/MAX77705/MAX77843 haptic controller support" depends on (MFD_MAX77693 || MFD_MAX77705 || MFD_MAX77843) && PWM select INPUT_FF_MEMLESS help This option enables support for the haptic controller on MAXIM MAX77693, MAX77705 and MAX77843 chips. To compile this driver as module, choose M here: the module will be called max77693-haptic. config INPUT_MAX8925_ONKEY tristate "MAX8925 ONKEY support" depends on MFD_MAX8925 help Support the ONKEY of MAX8925 PMICs as an input device reporting power button status. To compile this driver as a module, choose M here: the module will be called max8925_onkey. config INPUT_MAX8997_HAPTIC tristate "MAXIM MAX8997 haptic controller support" depends on PWM && MFD_MAX8997 select INPUT_FF_MEMLESS help This option enables device driver support for the haptic controller on MAXIM MAX8997 chip. This driver supports ff-memless interface from input framework. To compile this driver as module, choose M here: the module will be called max8997-haptic. config INPUT_MC13783_PWRBUTTON tristate "MC13783 ON buttons" depends on MFD_MC13XXX help Support the ON buttons of MC13783 PMIC as an input device reporting power button status. To compile this driver as a module, choose M here: the module will be called mc13783-pwrbutton. config INPUT_MMA8450 tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer" depends on I2C help Say Y here if you want to support Freescale's MMA8450 Accelerometer through I2C interface. To compile this driver as a module, choose M here: the module will be called mma8450. config INPUT_APANEL tristate "Fujitsu Lifebook Application Panel buttons" depends on X86 && I2C && LEDS_CLASS select CHECK_SIGNATURE help Say Y here for support of the Application Panel buttons, used on Fujitsu Lifebook. These are attached to the mainboard through an SMBus interface managed by the I2C Intel ICH (i801) driver, which you should also build for this kernel. To compile this driver as a module, choose M here: the module will be called apanel. config INPUT_GPIO_BEEPER tristate "Generic GPIO Beeper support" depends on GPIOLIB || COMPILE_TEST help Say Y here if you have a beeper connected to a GPIO pin. To compile this driver as a module, choose M here: the module will be called gpio-beeper. config INPUT_GPIO_DECODER tristate "Polled GPIO Decoder Input driver" depends on GPIOLIB || COMPILE_TEST help Say Y here if you want driver to read status of multiple GPIO lines and report the encoded value as an absolute integer to input subsystem. To compile this driver as a module, choose M here: the module will be called gpio_decoder. config INPUT_GPIO_VIBRA tristate "GPIO vibrator support" depends on GPIOLIB || COMPILE_TEST select INPUT_FF_MEMLESS help Say Y here to get support for GPIO based vibrator devices. If unsure, say N. To compile this driver as a module, choose M here: the module will be called gpio-vibra. config INPUT_COBALT_BTNS tristate "Cobalt button interface" depends on MIPS_COBALT help Say Y here if you want to support MIPS Cobalt button interface. To compile this driver as a module, choose M here: the module will be called cobalt_btns. config INPUT_CPCAP_PWRBUTTON tristate "CPCAP OnKey" depends on MFD_CPCAP help Say Y here if you want to enable power key reporting via the Motorola CPCAP chip. To compile this driver as a module, choose M here. The module will be called cpcap-pwrbutton. config INPUT_WISTRON_BTNS tristate "x86 Wistron laptop button interface" depends on X86_32 && !UML select INPUT_SPARSEKMAP select NEW_LEDS select LEDS_CLASS select CHECK_SIGNATURE help Say Y here for support of Wistron laptop button interfaces, used on laptops of various brands, including Acer and Fujitsu-Siemens. If available, mail and wifi LEDs will be controllable via /sys/class/leds. To compile this driver as a module, choose M here: the module will be called wistron_btns. config INPUT_ATLAS_BTNS tristate "x86 Atlas button interface" depends on X86 && ACPI help Say Y here for support of Atlas wallmount touchscreen buttons. The events will show up as scancodes F1 through F9 via evdev. To compile this driver as a module, choose M here: the module will be called atlas_btns. config INPUT_ATI_REMOTE2 tristate "ATI / Philips USB RF remote control" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use an ATI or Philips USB RF remote control. These are RF remotes with USB receivers. ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards and is also available as a separate product. This driver provides mouse pointer, left and right mouse buttons, and maps all the other remote buttons to keypress events. To compile this driver as a module, choose M here: the module will be called ati_remote2. config INPUT_KEYSPAN_REMOTE tristate "Keyspan DMR USB remote control" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use a Keyspan DMR USB remote control. Currently only the UIA-11 type of receiver has been tested. The tag on the receiver that connects to the USB port should have a P/N that will tell you what type of DMR you have. The UIA-10 type is not supported at this time. This driver maps all buttons to keypress events. To compile this driver as a module, choose M here: the module will be called keyspan_remote. config INPUT_KXTJ9 tristate "Kionix KXTJ9 tri-axis digital accelerometer" depends on I2C help Say Y here to enable support for the Kionix KXTJ9 digital tri-axis accelerometer. To compile this driver as a module, choose M here: the module will be called kxtj9. config INPUT_POWERMATE tristate "Griffin PowerMate and Contour Jog support" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use Griffin PowerMate or Contour Jog devices. These are aluminum dials which can measure clockwise and anticlockwise rotation. The dial also acts as a pushbutton. The base contains an LED which can be instructed to pulse or to switch to a particular intensity. You can download userspace tools from <http://sowerbutts.com/powermate/>. To compile this driver as a module, choose M here: the module will be called powermate. config INPUT_YEALINK tristate "Yealink usb-p1k voip phone" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to enable keyboard and LCD functions of the Yealink usb-p1k usb phones. The audio part is enabled by the generic usb sound driver, so you might want to enable that as well. For information about how to use these additional functions, see <file:Documentation/input/devices/yealink.rst>. To compile this driver as a module, choose M here: the module will be called yealink. config INPUT_CM109 tristate "C-Media CM109 USB I/O Controller" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to enable keyboard and buzzer functions of the C-Media CM109 usb phones. The audio part is enabled by the generic usb sound driver, so you might want to enable that as well. To compile this driver as a module, choose M here: the module will be called cm109. config INPUT_REGULATOR_HAPTIC tristate "Regulator haptics support"Lines 1–500 of 1026. Load more
# SPDX-License-Identifier: GPL-2.0-only # # Input misc drivers configuration # menuconfig INPUT_MISC bool "Miscellaneous devices" help Say Y here, and a list of miscellaneous input drivers will be displayed. Everything that didn't fit into the other categories is here. This option doesn't affect the kernel. If unsure, say Y. if INPUT_MISC config INPUT_88PM860X_ONKEY tristate "88PM860x ONKEY support" depends on MFD_88PM860X help Support the ONKEY of Marvell 88PM860x PMICs as an input device reporting power button status. To compile this driver as a module, choose M here: the module will be called 88pm860x_onkey. config INPUT_88PM80X_ONKEY tristate "88PM80x ONKEY support" depends on MFD_88PM800 help Support the ONKEY of Marvell 88PM80x PMICs as an input device reporting power button status. To compile this driver as a module, choose M here: the module will be called 88pm80x_onkey. config INPUT_88PM886_ONKEY tristate "Marvell 88PM886 onkey support" depends on MFD_88PM886_PMIC help Support the onkey of Marvell 88PM886 PMIC as an input device reporting power button status. config INPUT_AB8500_PONKEY tristate "AB8500 Pon (PowerOn) Key" depends on AB8500_CORE help Say Y here to use the PowerOn Key for ST-Ericsson's AB8500 Mix-Sig PMIC. To compile this driver as a module, choose M here: the module will be called ab8500-ponkey. config INPUT_AD714X tristate "Analog Devices AD714x Capacitance Touch Sensor" help Say Y here if you want to support an AD7142/3/7/8/7A touch sensor. You should select a bus connection too. To compile this driver as a module, choose M here: the module will be called ad714x. config INPUT_AD714X_I2C tristate "support I2C bus connection" depends on INPUT_AD714X && I2C default y help Say Y here if you have AD7142/AD7147 hooked to an I2C bus. To compile this driver as a module, choose M here: the module will be called ad714x-i2c. config INPUT_AD714X_SPI tristate "support SPI bus connection" depends on INPUT_AD714X && SPI default y help Say Y here if you have AD7142/AD7147 hooked to a SPI bus. To compile this driver as a module, choose M here: the module will be called ad714x-spi. config INPUT_ARIEL_PWRBUTTON tristate "Dell Wyse 3020 Power Button Driver" depends on SPI depends on MACH_MMP3_DT || COMPILE_TEST help Say Y to enable support for reporting power button status on on Dell Wyse 3020 ("Ariel") thin client. To compile this driver as a module, choose M here: the module will be called ariel-pwrbutton. config INPUT_ARIZONA_HAPTICS tristate "Arizona haptics support" depends on MFD_ARIZONA && SND_SOC select INPUT_FF_MEMLESS help Say Y to enable support for the haptics module in Arizona CODECs. To compile this driver as a module, choose M here: the module will be called arizona-haptics. config INPUT_ATC260X_ONKEY tristate "Actions Semi ATC260x PMIC ONKEY" depends on MFD_ATC260X help Support the ONKEY of ATC260x PMICs as an input device reporting power button status. ONKEY can be used to wakeup from low power modes and force a reset on long press. To compile this driver as a module, choose M here: the module will be called atc260x-onkey. config INPUT_ATMEL_CAPTOUCH tristate "Atmel Capacitive Touch Button Driver" depends on OF depends on I2C help Say Y here if an Atmel Capacitive Touch Button device which implements "captouch" protocol is connected to I2C bus. Typically this device consists of Atmel Touch sensor controlled by AtMegaXX MCU running firmware based on Qtouch library. One should find "atmel,captouch" node in the board specific DTS. To compile this driver as a module, choose M here: the module will be called atmel_captouch. config INPUT_AW86927 tristate "Awinic AW86927 Haptic Driver Support" depends on I2C && INPUT select INPUT_FF_MEMLESS select REGMAP_I2C help Say Y here if you have an Awinic AW86927 haptic chip. To compile this driver as a module, choose M here: the module will be called aw86927. config INPUT_BBNSM_PWRKEY tristate "NXP BBNSM Power Key Driver" depends on ARCH_MXC || COMPILE_TEST depends on OF help This is the bbnsm powerkey driver for the NXP i.MX application processors. To compile this driver as a module, choose M here; the module will be called bbnsm_pwrkey. config INPUT_BMA150 tristate "BMA150/SMB380 acceleration sensor support" depends on I2C help Say Y here if you have Bosch Sensortec's BMA150 or SMB380 acceleration sensor hooked to an I2C bus. To compile this driver as a module, choose M here: the module will be called bma150. config INPUT_CS40L50_VIBRA tristate "CS40L50 Haptic Driver support" depends on MFD_CS40L50_CORE help Say Y here to enable support for Cirrus Logic's CS40L50 haptic driver. To compile this driver as a module, choose M here: the module will be called cs40l50-vibra. config INPUT_E3X0_BUTTON tristate "NI Ettus Research USRP E3xx Button support." default n help Say Y here to enable support for the NI Ettus Research USRP E3xx Button. To compile this driver as a module, choose M here: the module will be called e3x0_button. config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM help Say Y here if you want the standard PC Speaker to be used for bells and whistles. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called pcspkr. config INPUT_PF1550_ONKEY tristate "NXP PF1550 Onkey support" depends on MFD_PF1550 help Say Y here if you want support for PF1550 PMIC. Onkey can trigger release and 1s(push hold), 2s, 3s, 4s, 8s interrupt for long press detect. To compile this driver as a module, choose M here. The module will be called pf1550-onkey. config INPUT_PM8941_PWRKEY tristate "Qualcomm PM8941 power key support" depends on MFD_SPMI_PMIC help Say Y here if you want support for the power key usually found on boards using a Qualcomm PM8941 compatible PMIC. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called pm8941-pwrkey. config INPUT_PM8XXX_VIBRATOR tristate "Qualcomm PM8XXX vibrator support" depends on MFD_PM8XXX || MFD_SPMI_PMIC select INPUT_FF_MEMLESS help This option enables device driver support for the vibrator on Qualcomm PM8xxx chip. This driver supports ff-memless interface from input framework. To compile this driver as module, choose M here: the module will be called pm8xxx-vibrator. config INPUT_PMIC8XXX_PWRKEY tristate "PMIC8XXX power key support" depends on MFD_PM8XXX help Say Y here if you want support for the PMIC8XXX power key. If unsure, say N. To compile this driver as a module, choose M here: the module will be called pmic8xxx-pwrkey. config INPUT_SPARCSPKR tristate "SPARC Speaker support" depends on PCI && SPARC64 help Say Y here if you want the standard Speaker on Sparc PCI systems to be used for bells and whistles. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called sparcspkr. config INPUT_M68K_BEEP tristate "M68k Beeper support" depends on M68K config INPUT_MAX7360_ROTARY tristate "Maxim MAX7360 Rotary Encoder" depends on MFD_MAX7360 help If you say yes here you get support for the rotary encoder on the Maxim MAX7360 I/O Expander. To compile this driver as a module, choose M here: the module will be called max7360_rotary. config INPUT_MAX77650_ONKEY tristate "Maxim MAX77650 ONKEY support" depends on MFD_MAX77650 help Support the ONKEY of the MAX77650 PMIC as an input device. To compile this driver as a module, choose M here: the module will be called max77650-onkey. config INPUT_MAX77693_HAPTIC tristate "MAXIM MAX77693/MAX77705/MAX77843 haptic controller support" depends on (MFD_MAX77693 || MFD_MAX77705 || MFD_MAX77843) && PWM select INPUT_FF_MEMLESS help This option enables support for the haptic controller on MAXIM MAX77693, MAX77705 and MAX77843 chips. To compile this driver as module, choose M here: the module will be called max77693-haptic. config INPUT_MAX8925_ONKEY tristate "MAX8925 ONKEY support" depends on MFD_MAX8925 help Support the ONKEY of MAX8925 PMICs as an input device reporting power button status. To compile this driver as a module, choose M here: the module will be called max8925_onkey. config INPUT_MAX8997_HAPTIC tristate "MAXIM MAX8997 haptic controller support" depends on PWM && MFD_MAX8997 select INPUT_FF_MEMLESS help This option enables device driver support for the haptic controller on MAXIM MAX8997 chip. This driver supports ff-memless interface from input framework. To compile this driver as module, choose M here: the module will be called max8997-haptic. config INPUT_MC13783_PWRBUTTON tristate "MC13783 ON buttons" depends on MFD_MC13XXX help Support the ON buttons of MC13783 PMIC as an input device reporting power button status. To compile this driver as a module, choose M here: the module will be called mc13783-pwrbutton. config INPUT_MMA8450 tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer" depends on I2C help Say Y here if you want to support Freescale's MMA8450 Accelerometer through I2C interface. To compile this driver as a module, choose M here: the module will be called mma8450. config INPUT_APANEL tristate "Fujitsu Lifebook Application Panel buttons" depends on X86 && I2C && LEDS_CLASS select CHECK_SIGNATURE help Say Y here for support of the Application Panel buttons, used on Fujitsu Lifebook. These are attached to the mainboard through an SMBus interface managed by the I2C Intel ICH (i801) driver, which you should also build for this kernel. To compile this driver as a module, choose M here: the module will be called apanel. config INPUT_GPIO_BEEPER tristate "Generic GPIO Beeper support" depends on GPIOLIB || COMPILE_TEST help Say Y here if you have a beeper connected to a GPIO pin. To compile this driver as a module, choose M here: the module will be called gpio-beeper. config INPUT_GPIO_DECODER tristate "Polled GPIO Decoder Input driver" depends on GPIOLIB || COMPILE_TEST help Say Y here if you want driver to read status of multiple GPIO lines and report the encoded value as an absolute integer to input subsystem. To compile this driver as a module, choose M here: the module will be called gpio_decoder. config INPUT_GPIO_VIBRA tristate "GPIO vibrator support" depends on GPIOLIB || COMPILE_TEST select INPUT_FF_MEMLESS help Say Y here to get support for GPIO based vibrator devices. If unsure, say N. To compile this driver as a module, choose M here: the module will be called gpio-vibra. config INPUT_COBALT_BTNS tristate "Cobalt button interface" depends on MIPS_COBALT help Say Y here if you want to support MIPS Cobalt button interface. To compile this driver as a module, choose M here: the module will be called cobalt_btns. config INPUT_CPCAP_PWRBUTTON tristate "CPCAP OnKey" depends on MFD_CPCAP help Say Y here if you want to enable power key reporting via the Motorola CPCAP chip. To compile this driver as a module, choose M here. The module will be called cpcap-pwrbutton. config INPUT_WISTRON_BTNS tristate "x86 Wistron laptop button interface" depends on X86_32 && !UML select INPUT_SPARSEKMAP select NEW_LEDS select LEDS_CLASS select CHECK_SIGNATURE help Say Y here for support of Wistron laptop button interfaces, used on laptops of various brands, including Acer and Fujitsu-Siemens. If available, mail and wifi LEDs will be controllable via /sys/class/leds. To compile this driver as a module, choose M here: the module will be called wistron_btns. config INPUT_ATLAS_BTNS tristate "x86 Atlas button interface" depends on X86 && ACPI help Say Y here for support of Atlas wallmount touchscreen buttons. The events will show up as scancodes F1 through F9 via evdev. To compile this driver as a module, choose M here: the module will be called atlas_btns. config INPUT_ATI_REMOTE2 tristate "ATI / Philips USB RF remote control" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use an ATI or Philips USB RF remote control. These are RF remotes with USB receivers. ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards and is also available as a separate product. This driver provides mouse pointer, left and right mouse buttons, and maps all the other remote buttons to keypress events. To compile this driver as a module, choose M here: the module will be called ati_remote2. config INPUT_KEYSPAN_REMOTE tristate "Keyspan DMR USB remote control" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use a Keyspan DMR USB remote control. Currently only the UIA-11 type of receiver has been tested. The tag on the receiver that connects to the USB port should have a P/N that will tell you what type of DMR you have. The UIA-10 type is not supported at this time. This driver maps all buttons to keypress events. To compile this driver as a module, choose M here: the module will be called keyspan_remote. config INPUT_KXTJ9 tristate "Kionix KXTJ9 tri-axis digital accelerometer" depends on I2C help Say Y here to enable support for the Kionix KXTJ9 digital tri-axis accelerometer. To compile this driver as a module, choose M here: the module will be called kxtj9. config INPUT_POWERMATE tristate "Griffin PowerMate and Contour Jog support" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use Griffin PowerMate or Contour Jog devices. These are aluminum dials which can measure clockwise and anticlockwise rotation. The dial also acts as a pushbutton. The base contains an LED which can be instructed to pulse or to switch to a particular intensity. You can download userspace tools from <http://sowerbutts.com/powermate/>. To compile this driver as a module, choose M here: the module will be called powermate. config INPUT_YEALINK tristate "Yealink usb-p1k voip phone" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to enable keyboard and LCD functions of the Yealink usb-p1k usb phones. The audio part is enabled by the generic usb sound driver, so you might want to enable that as well. For information about how to use these additional functions, see <file:Documentation/input/devices/yealink.rst>. To compile this driver as a module, choose M here: the module will be called yealink. config INPUT_CM109 tristate "C-Media CM109 USB I/O Controller" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to enable keyboard and buzzer functions of the C-Media CM109 usb phones. The audio part is enabled by the generic usb sound driver, so you might want to enable that as well. To compile this driver as a module, choose M here: the module will be called cm109. config INPUT_REGULATOR_HAPTIC tristate "Regulator haptics support"