// SPDX-License-Identifier: GPL-2.0-only/* * Driver for the VoIP USB phones with CM109 chipsets. * * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org> */ /* * Tested devices: * - Komunikate KIP1000 * - Genius G-talk * - Allied-Telesis Corega USBPH01 * - ... * * This driver is based on the yealink.c driver * * Thanks to: * - Authors of yealink.c * - Thomas Reitmayr * - Oliver Neukum for good review comments and code * - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap * - Dmitry Torokhov for valuable input and review * * Todo: * - Read/write EEPROM */ #include <linux/kernel.h>#include <linux/init.h>#include <linux/slab.h>#include <linux/module.h>#include <linux/moduleparam.h>#include <linux/rwsem.h>#include <linux/usb/input.h> #define DRIVER_VERSION "20080805"#define DRIVER_AUTHOR "Alfred E. Heggestad"#define DRIVER_DESC "CM109 phone driver" static char *phone = "kip1000";module_param(phone, charp, S_IRUSR);MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}"); enum { /* HID Registers */ HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */ HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */ HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */ HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */ HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */ HID_OR1 = 0x01, /* GPO - General Purpose Output */ HID_OR2 = 0x02, /* Set GPIO to input/output mode */ HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */ /* HID_IR0 */ RECORD_MUTE = 1 << 3, PLAYBACK_MUTE = 1 << 2, VOLUME_DOWN = 1 << 1, VOLUME_UP = 1 << 0, /* HID_OR0 */ /* bits 7-6 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer and SPDIF 1: HID_OR0-3 are used as generic HID registers 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL, EEPROM_DATA0-1, EEPROM_CTRL (see Note) 3: Reserved */ HID_OR_GPO_BUZ_SPDIF = 0 << 6, HID_OR_GENERIC_HID_REG = 1 << 6, HID_OR_MAP_MCU_EEPROM = 2 << 6, BUZZER_ON = 1 << 5, /* up to 256 normal keys, up to 15 special key combinations */ KEYMAP_SIZE = 256 + 15,}; /* CM109 protocol packet */struct cm109_ctl_packet { u8 byte[4];} __attribute__ ((packed)); enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) }; /* CM109 device structure */struct cm109_dev { struct input_dev *idev; /* input device */ struct usb_device *udev; /* usb device */ struct usb_interface *intf; /* irq input channel */ struct cm109_ctl_packet *irq_data; dma_addr_t irq_dma; struct urb *urb_irq; /* control output channel */ struct cm109_ctl_packet *ctl_data; dma_addr_t ctl_dma; struct usb_ctrlrequest *ctl_req; struct urb *urb_ctl; /* * The 3 bitfields below are protected by ctl_submit_lock. * They have to be separate since they are accessed from IRQ * context. */ unsigned irq_urb_pending:1; /* irq_urb is in flight */ unsigned ctl_urb_pending:1; /* ctl_urb is in flight */ unsigned buzzer_pending:1; /* need to issue buzz command */ spinlock_t ctl_submit_lock; unsigned char buzzer_state; /* on/off */ /* flags */ unsigned open:1; unsigned resetting:1; unsigned shutdown:1; /* This mutex protects writes to the above flags */ struct mutex pm_mutex; unsigned short keymap[KEYMAP_SIZE]; char phys[64]; /* physical device path */ int key_code; /* last reported key */ int keybit; /* 0=new scan 1,2,4,8=scan columns */ u8 gpi; /* Cached value of GPI (high nibble) */}; /****************************************************************************** * CM109 key interface *****************************************************************************/ static unsigned short special_keymap(int code){ if (code > 0xff) { switch (code - 0xff) { case RECORD_MUTE: return KEY_MICMUTE; case PLAYBACK_MUTE: return KEY_MUTE; case VOLUME_DOWN: return KEY_VOLUMEDOWN; case VOLUME_UP: return KEY_VOLUMEUP; } } return KEY_RESERVED;} /* Map device buttons to internal key events. * * The "up" and "down" keys, are symbolised by arrows on the button. * The "pickup" and "hangup" keys are symbolised by a green and red phone * on the button. Komunikate KIP1000 Keyboard Matrix -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10) | | | | <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20) | | | | END - 7 -- 8 -- 9 --> GPI pin 6 (0x40) | | | | OK -- * -- 0 -- # --> GPI pin 7 (0x80) | | | | /|\ /|\ /|\ /|\ | | | |GPOpin: 3 2 1 0 0x8 0x4 0x2 0x1 */static unsigned short keymap_kip1000(int scancode){ switch (scancode) { /* phone key: */ case 0x82: return KEY_NUMERIC_0; /* 0 */ case 0x14: return KEY_NUMERIC_1; /* 1 */ case 0x12: return KEY_NUMERIC_2; /* 2 */ case 0x11: return KEY_NUMERIC_3; /* 3 */ case 0x24: return KEY_NUMERIC_4; /* 4 */ case 0x22: return KEY_NUMERIC_5; /* 5 */ case 0x21: return KEY_NUMERIC_6; /* 6 */ case 0x44: return KEY_NUMERIC_7; /* 7 */ case 0x42: return KEY_NUMERIC_8; /* 8 */ case 0x41: return KEY_NUMERIC_9; /* 9 */ case 0x81: return KEY_NUMERIC_POUND; /* # */ case 0x84: return KEY_NUMERIC_STAR; /* * */ case 0x88: return KEY_ENTER; /* pickup */ case 0x48: return KEY_ESC; /* hangup */ case 0x28: return KEY_LEFT; /* IN */ case 0x18: return KEY_RIGHT; /* OUT */ default: return special_keymap(scancode); }} /* Contributed by Shaun Jackman <sjackman@gmail.com> Genius G-Talk keyboard matrix 0 1 2 3 4: 0 4 8 Talk 5: 1 5 9 End 6: 2 6 # Up 7: 3 7 * Down*/static unsigned short keymap_gtalk(int scancode){ switch (scancode) { case 0x11: return KEY_NUMERIC_0; case 0x21: return KEY_NUMERIC_1; case 0x41: return KEY_NUMERIC_2; case 0x81: return KEY_NUMERIC_3; case 0x12: return KEY_NUMERIC_4; case 0x22: return KEY_NUMERIC_5; case 0x42: return KEY_NUMERIC_6; case 0x82: return KEY_NUMERIC_7; case 0x14: return KEY_NUMERIC_8; case 0x24: return KEY_NUMERIC_9; case 0x44: return KEY_NUMERIC_POUND; /* # */ case 0x84: return KEY_NUMERIC_STAR; /* * */ case 0x18: return KEY_ENTER; /* Talk (green handset) */ case 0x28: return KEY_ESC; /* End (red handset) */ case 0x48: return KEY_UP; /* Menu up (rocker switch) */ case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */ default: return special_keymap(scancode); }} /* * Keymap for Allied-Telesis Corega USBPH01 * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html * * Contributed by july@nat.bg */static unsigned short keymap_usbph01(int scancode){ switch (scancode) { case 0x11: return KEY_NUMERIC_0; /* 0 */ case 0x21: return KEY_NUMERIC_1; /* 1 */ case 0x41: return KEY_NUMERIC_2; /* 2 */ case 0x81: return KEY_NUMERIC_3; /* 3 */ case 0x12: return KEY_NUMERIC_4; /* 4 */ case 0x22: return KEY_NUMERIC_5; /* 5 */ case 0x42: return KEY_NUMERIC_6; /* 6 */ case 0x82: return KEY_NUMERIC_7; /* 7 */ case 0x14: return KEY_NUMERIC_8; /* 8 */ case 0x24: return KEY_NUMERIC_9; /* 9 */ case 0x44: return KEY_NUMERIC_POUND; /* # */ case 0x84: return KEY_NUMERIC_STAR; /* * */ case 0x18: return KEY_ENTER; /* pickup */ case 0x28: return KEY_ESC; /* hangup */ case 0x48: return KEY_LEFT; /* IN */ case 0x88: return KEY_RIGHT; /* OUT */ default: return special_keymap(scancode); }} /* * Keymap for ATCom AU-100 * http://www.atcom.cn/products.html * http://www.packetizer.com/products/au100/ * http://www.voip-info.org/wiki/view/AU-100 * * Contributed by daniel@gimpelevich.san-francisco.ca.us */static unsigned short keymap_atcom(int scancode){ switch (scancode) { /* phone key: */ case 0x82: return KEY_NUMERIC_0; /* 0 */ case 0x11: return KEY_NUMERIC_1; /* 1 */ case 0x12: return KEY_NUMERIC_2; /* 2 */ case 0x14: return KEY_NUMERIC_3; /* 3 */ case 0x21: return KEY_NUMERIC_4; /* 4 */ case 0x22: return KEY_NUMERIC_5; /* 5 */ case 0x24: return KEY_NUMERIC_6; /* 6 */ case 0x41: return KEY_NUMERIC_7; /* 7 */ case 0x42: return KEY_NUMERIC_8; /* 8 */ case 0x44: return KEY_NUMERIC_9; /* 9 */ case 0x84: return KEY_NUMERIC_POUND; /* # */ case 0x81: return KEY_NUMERIC_STAR; /* * */ case 0x18: return KEY_ENTER; /* pickup */ case 0x28: return KEY_ESC; /* hangup */ case 0x48: return KEY_LEFT; /* left arrow */ case 0x88: return KEY_RIGHT; /* right arrow */ default: return special_keymap(scancode); }} static unsigned short (*keymap)(int) = keymap_kip1000; /* * Completes a request by converting the data into events for the * input subsystem. */static void report_key(struct cm109_dev *dev, int key){ struct input_dev *idev = dev->idev; if (dev->key_code >= 0) { /* old key up */ input_report_key(idev, dev->key_code, 0); } dev->key_code = key; if (key >= 0) { /* new valid key */ input_report_key(idev, key, 1); } input_sync(idev);} /* * Converts data of special key presses (volume, mute) into events * for the input subsystem, sends press-n-release for mute keys. */static void cm109_report_special(struct cm109_dev *dev){ static const u8 autorelease = RECORD_MUTE | PLAYBACK_MUTE; struct input_dev *idev = dev->idev; u8 data = dev->irq_data->byte[HID_IR0]; unsigned short keycode; int i; for (i = 0; i < 4; i++) { keycode = dev->keymap[0xff + BIT(i)]; if (keycode == KEY_RESERVED) continue; input_report_key(idev, keycode, data & BIT(i)); if (data & autorelease & BIT(i)) { input_sync(idev); input_report_key(idev, keycode, 0); } } input_sync(idev);} /****************************************************************************** * CM109 usb communication interface *****************************************************************************/ static void cm109_submit_buzz_toggle(struct cm109_dev *dev){ int error; if (dev->buzzer_state) dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; else dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error);} static void cm109_submit_ctl(struct cm109_dev *dev){ int error; guard(spinlock_irqsave)(&dev->ctl_submit_lock); dev->irq_urb_pending = 0; if (unlikely(dev->shutdown)) return; if (dev->buzzer_state) dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; else dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; dev->ctl_data->byte[HID_OR1] = dev->keybit; dev->ctl_data->byte[HID_OR2] = dev->keybit; dev->buzzer_pending = 0; dev->ctl_urb_pending = 1; error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error);} /* * IRQ handler */static void cm109_urb_irq_callback(struct urb *urb){ struct cm109_dev *dev = urb->context; const int status = urb->status; dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n", dev->irq_data->byte[0], dev->irq_data->byte[1], dev->irq_data->byte[2], dev->irq_data->byte[3], dev->keybit); if (status) { if (status == -ESHUTDOWN) return; dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", __func__, status); goto out; } /* Special keys */ cm109_report_special(dev); /* Scan key column */ if (dev->keybit == 0xf) { /* Any changes ? */ if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0)) goto out; dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0; dev->keybit = 0x1; } else { report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]); dev->keybit <<= 1; if (dev->keybit > 0x8) dev->keybit = 0xf; } out: cm109_submit_ctl(dev);} static void cm109_urb_ctl_callback(struct urb *urb){ struct cm109_dev *dev = urb->context; const int status = urb->status; int error; dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n", dev->ctl_data->byte[0], dev->ctl_data->byte[1], dev->ctl_data->byte[2], dev->ctl_data->byte[3]); if (status) { if (status == -ESHUTDOWN) return; dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", __func__, status); } guard(spinlock_irqsave)(&dev->ctl_submit_lock); dev->ctl_urb_pending = 0; if (unlikely(dev->shutdown)) return; if (dev->buzzer_pending || status) { dev->buzzer_pending = 0; dev->ctl_urb_pending = 1; cm109_submit_buzz_toggle(dev); } else if (likely(!dev->irq_urb_pending)) { /* ask for key data */ dev->irq_urb_pending = 1; error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC); if (error) dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_irq) failed %d\n", __func__, error); }} static void cm109_toggle_buzzer_async(struct cm109_dev *dev){ guard(spinlock_irqsave)(&dev->ctl_submit_lock); if (dev->ctl_urb_pending) { /* URB completion will resubmit */ dev->buzzer_pending = 1; } else { dev->ctl_urb_pending = 1; cm109_submit_buzz_toggle(dev); }} static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on){ int error; if (on) dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; else dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; error = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), dev->ctl_req->bRequest, dev->ctl_req->bRequestType,Lines 1–500 of 940. Load more
// SPDX-License-Identifier: GPL-2.0-only /* * Driver for the VoIP USB phones with CM109 chipsets. * * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org> */ /* * Tested devices: * - Komunikate KIP1000 * - Genius G-talk * - Allied-Telesis Corega USBPH01 * - ... * * This driver is based on the yealink.c driver * * Thanks to: * - Authors of yealink.c * - Thomas Reitmayr * - Oliver Neukum for good review comments and code * - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap * - Dmitry Torokhov for valuable input and review * * Todo: * - Read/write EEPROM */ #include <linux/kernel.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/rwsem.h> #include <linux/usb/input.h> #define DRIVER_VERSION "20080805" #define DRIVER_AUTHOR "Alfred E. Heggestad" #define DRIVER_DESC "CM109 phone driver" static char *phone = "kip1000"; module_param(phone, charp, S_IRUSR); MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}"); enum { /* HID Registers */ HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */ HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */ HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */ HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */ HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */ HID_OR1 = 0x01, /* GPO - General Purpose Output */ HID_OR2 = 0x02, /* Set GPIO to input/output mode */ HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */ /* HID_IR0 */ RECORD_MUTE = 1 << 3, PLAYBACK_MUTE = 1 << 2, VOLUME_DOWN = 1 << 1, VOLUME_UP = 1 << 0, /* HID_OR0 */ /* bits 7-6 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer and SPDIF 1: HID_OR0-3 are used as generic HID registers 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL, EEPROM_DATA0-1, EEPROM_CTRL (see Note) 3: Reserved */ HID_OR_GPO_BUZ_SPDIF = 0 << 6, HID_OR_GENERIC_HID_REG = 1 << 6, HID_OR_MAP_MCU_EEPROM = 2 << 6, BUZZER_ON = 1 << 5, /* up to 256 normal keys, up to 15 special key combinations */ KEYMAP_SIZE = 256 + 15, }; /* CM109 protocol packet */ struct cm109_ctl_packet { u8 byte[4]; } __attribute__ ((packed)); enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) }; /* CM109 device structure */ struct cm109_dev { struct input_dev *idev; /* input device */ struct usb_device *udev; /* usb device */ struct usb_interface *intf; /* irq input channel */ struct cm109_ctl_packet *irq_data; dma_addr_t irq_dma; struct urb *urb_irq; /* control output channel */ struct cm109_ctl_packet *ctl_data; dma_addr_t ctl_dma; struct usb_ctrlrequest *ctl_req; struct urb *urb_ctl; /* * The 3 bitfields below are protected by ctl_submit_lock. * They have to be separate since they are accessed from IRQ * context. */ unsigned irq_urb_pending:1; /* irq_urb is in flight */ unsigned ctl_urb_pending:1; /* ctl_urb is in flight */ unsigned buzzer_pending:1; /* need to issue buzz command */ spinlock_t ctl_submit_lock; unsigned char buzzer_state; /* on/off */ /* flags */ unsigned open:1; unsigned resetting:1; unsigned shutdown:1; /* This mutex protects writes to the above flags */ struct mutex pm_mutex; unsigned short keymap[KEYMAP_SIZE]; char phys[64]; /* physical device path */ int key_code; /* last reported key */ int keybit; /* 0=new scan 1,2,4,8=scan columns */ u8 gpi; /* Cached value of GPI (high nibble) */ }; /****************************************************************************** * CM109 key interface *****************************************************************************/ static unsigned short special_keymap(int code) { if (code > 0xff) { switch (code - 0xff) { case RECORD_MUTE: return KEY_MICMUTE; case PLAYBACK_MUTE: return KEY_MUTE; case VOLUME_DOWN: return KEY_VOLUMEDOWN; case VOLUME_UP: return KEY_VOLUMEUP; } } return KEY_RESERVED; } /* Map device buttons to internal key events. * * The "up" and "down" keys, are symbolised by arrows on the button. * The "pickup" and "hangup" keys are symbolised by a green and red phone * on the button. Komunikate KIP1000 Keyboard Matrix -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10) | | | | <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20) | | | | END - 7 -- 8 -- 9 --> GPI pin 6 (0x40) | | | | OK -- * -- 0 -- # --> GPI pin 7 (0x80) | | | | /|\ /|\ /|\ /|\ | | | | GPO pin: 3 2 1 0 0x8 0x4 0x2 0x1 */ static unsigned short keymap_kip1000(int scancode) { switch (scancode) { /* phone key: */ case 0x82: return KEY_NUMERIC_0; /* 0 */ case 0x14: return KEY_NUMERIC_1; /* 1 */ case 0x12: return KEY_NUMERIC_2; /* 2 */ case 0x11: return KEY_NUMERIC_3; /* 3 */ case 0x24: return KEY_NUMERIC_4; /* 4 */ case 0x22: return KEY_NUMERIC_5; /* 5 */ case 0x21: return KEY_NUMERIC_6; /* 6 */ case 0x44: return KEY_NUMERIC_7; /* 7 */ case 0x42: return KEY_NUMERIC_8; /* 8 */ case 0x41: return KEY_NUMERIC_9; /* 9 */ case 0x81: return KEY_NUMERIC_POUND; /* # */ case 0x84: return KEY_NUMERIC_STAR; /* * */ case 0x88: return KEY_ENTER; /* pickup */ case 0x48: return KEY_ESC; /* hangup */ case 0x28: return KEY_LEFT; /* IN */ case 0x18: return KEY_RIGHT; /* OUT */ default: return special_keymap(scancode); } } /* Contributed by Shaun Jackman <sjackman@gmail.com> Genius G-Talk keyboard matrix 0 1 2 3 4: 0 4 8 Talk 5: 1 5 9 End 6: 2 6 # Up 7: 3 7 * Down */ static unsigned short keymap_gtalk(int scancode) { switch (scancode) { case 0x11: return KEY_NUMERIC_0; case 0x21: return KEY_NUMERIC_1; case 0x41: return KEY_NUMERIC_2; case 0x81: return KEY_NUMERIC_3; case 0x12: return KEY_NUMERIC_4; case 0x22: return KEY_NUMERIC_5; case 0x42: return KEY_NUMERIC_6; case 0x82: return KEY_NUMERIC_7; case 0x14: return KEY_NUMERIC_8; case 0x24: return KEY_NUMERIC_9; case 0x44: return KEY_NUMERIC_POUND; /* # */ case 0x84: return KEY_NUMERIC_STAR; /* * */ case 0x18: return KEY_ENTER; /* Talk (green handset) */ case 0x28: return KEY_ESC; /* End (red handset) */ case 0x48: return KEY_UP; /* Menu up (rocker switch) */ case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */ default: return special_keymap(scancode); } } /* * Keymap for Allied-Telesis Corega USBPH01 * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html * * Contributed by july@nat.bg */ static unsigned short keymap_usbph01(int scancode) { switch (scancode) { case 0x11: return KEY_NUMERIC_0; /* 0 */ case 0x21: return KEY_NUMERIC_1; /* 1 */ case 0x41: return KEY_NUMERIC_2; /* 2 */ case 0x81: return KEY_NUMERIC_3; /* 3 */ case 0x12: return KEY_NUMERIC_4; /* 4 */ case 0x22: return KEY_NUMERIC_5; /* 5 */ case 0x42: return KEY_NUMERIC_6; /* 6 */ case 0x82: return KEY_NUMERIC_7; /* 7 */ case 0x14: return KEY_NUMERIC_8; /* 8 */ case 0x24: return KEY_NUMERIC_9; /* 9 */ case 0x44: return KEY_NUMERIC_POUND; /* # */ case 0x84: return KEY_NUMERIC_STAR; /* * */ case 0x18: return KEY_ENTER; /* pickup */ case 0x28: return KEY_ESC; /* hangup */ case 0x48: return KEY_LEFT; /* IN */ case 0x88: return KEY_RIGHT; /* OUT */ default: return special_keymap(scancode); } } /* * Keymap for ATCom AU-100 * http://www.atcom.cn/products.html * http://www.packetizer.com/products/au100/ * http://www.voip-info.org/wiki/view/AU-100 * * Contributed by daniel@gimpelevich.san-francisco.ca.us */ static unsigned short keymap_atcom(int scancode) { switch (scancode) { /* phone key: */ case 0x82: return KEY_NUMERIC_0; /* 0 */ case 0x11: return KEY_NUMERIC_1; /* 1 */ case 0x12: return KEY_NUMERIC_2; /* 2 */ case 0x14: return KEY_NUMERIC_3; /* 3 */ case 0x21: return KEY_NUMERIC_4; /* 4 */ case 0x22: return KEY_NUMERIC_5; /* 5 */ case 0x24: return KEY_NUMERIC_6; /* 6 */ case 0x41: return KEY_NUMERIC_7; /* 7 */ case 0x42: return KEY_NUMERIC_8; /* 8 */ case 0x44: return KEY_NUMERIC_9; /* 9 */ case 0x84: return KEY_NUMERIC_POUND; /* # */ case 0x81: return KEY_NUMERIC_STAR; /* * */ case 0x18: return KEY_ENTER; /* pickup */ case 0x28: return KEY_ESC; /* hangup */ case 0x48: return KEY_LEFT; /* left arrow */ case 0x88: return KEY_RIGHT; /* right arrow */ default: return special_keymap(scancode); } } static unsigned short (*keymap)(int) = keymap_kip1000; /* * Completes a request by converting the data into events for the * input subsystem. */ static void report_key(struct cm109_dev *dev, int key) { struct input_dev *idev = dev->idev; if (dev->key_code >= 0) { /* old key up */ input_report_key(idev, dev->key_code, 0); } dev->key_code = key; if (key >= 0) { /* new valid key */ input_report_key(idev, key, 1); } input_sync(idev); } /* * Converts data of special key presses (volume, mute) into events * for the input subsystem, sends press-n-release for mute keys. */ static void cm109_report_special(struct cm109_dev *dev) { static const u8 autorelease = RECORD_MUTE | PLAYBACK_MUTE; struct input_dev *idev = dev->idev; u8 data = dev->irq_data->byte[HID_IR0]; unsigned short keycode; int i; for (i = 0; i < 4; i++) { keycode = dev->keymap[0xff + BIT(i)]; if (keycode == KEY_RESERVED) continue; input_report_key(idev, keycode, data & BIT(i)); if (data & autorelease & BIT(i)) { input_sync(idev); input_report_key(idev, keycode, 0); } } input_sync(idev); } /****************************************************************************** * CM109 usb communication interface *****************************************************************************/ static void cm109_submit_buzz_toggle(struct cm109_dev *dev) { int error; if (dev->buzzer_state) dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; else dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error); } static void cm109_submit_ctl(struct cm109_dev *dev) { int error; guard(spinlock_irqsave)(&dev->ctl_submit_lock); dev->irq_urb_pending = 0; if (unlikely(dev->shutdown)) return; if (dev->buzzer_state) dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; else dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; dev->ctl_data->byte[HID_OR1] = dev->keybit; dev->ctl_data->byte[HID_OR2] = dev->keybit; dev->buzzer_pending = 0; dev->ctl_urb_pending = 1; error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error); } /* * IRQ handler */ static void cm109_urb_irq_callback(struct urb *urb) { struct cm109_dev *dev = urb->context; const int status = urb->status; dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n", dev->irq_data->byte[0], dev->irq_data->byte[1], dev->irq_data->byte[2], dev->irq_data->byte[3], dev->keybit); if (status) { if (status == -ESHUTDOWN) return; dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", __func__, status); goto out; } /* Special keys */ cm109_report_special(dev); /* Scan key column */ if (dev->keybit == 0xf) { /* Any changes ? */ if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0)) goto out; dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0; dev->keybit = 0x1; } else { report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]); dev->keybit <<= 1; if (dev->keybit > 0x8) dev->keybit = 0xf; } out: cm109_submit_ctl(dev); } static void cm109_urb_ctl_callback(struct urb *urb) { struct cm109_dev *dev = urb->context; const int status = urb->status; int error; dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n", dev->ctl_data->byte[0], dev->ctl_data->byte[1], dev->ctl_data->byte[2], dev->ctl_data->byte[3]); if (status) { if (status == -ESHUTDOWN) return; dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", __func__, status); } guard(spinlock_irqsave)(&dev->ctl_submit_lock); dev->ctl_urb_pending = 0; if (unlikely(dev->shutdown)) return; if (dev->buzzer_pending || status) { dev->buzzer_pending = 0; dev->ctl_urb_pending = 1; cm109_submit_buzz_toggle(dev); } else if (likely(!dev->irq_urb_pending)) { /* ask for key data */ dev->irq_urb_pending = 1; error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC); if (error) dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_irq) failed %d\n", __func__, error); } } static void cm109_toggle_buzzer_async(struct cm109_dev *dev) { guard(spinlock_irqsave)(&dev->ctl_submit_lock); if (dev->ctl_urb_pending) { /* URB completion will resubmit */ dev->buzzer_pending = 1; } else { dev->ctl_urb_pending = 1; cm109_submit_buzz_toggle(dev); } } static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) { int error; if (on) dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; else dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; error = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), dev->ctl_req->bRequest, dev->ctl_req->bRequestType,