What:		/sys/module/pch_phub/drivers/.../pch_macDate:		August 2010KernelVersion:	2.6.35Contact:	masa-korg@dsn.okisemi.comDescription:	Write/read GbE MAC address. What:		/sys/module/pch_phub/drivers/.../pch_firmwareDate:		August 2010KernelVersion:	2.6.35Contact:	masa-korg@dsn.okisemi.comDescription:	Write/read Option ROM data.  What:		/sys/module/ehci_hcd/drivers/.../uframe_periodic_maxDate:		July 2011KernelVersion:	3.1Contact:	Kirill Smelkov <kirr@mns.spb.ru>Description:	Maximum time allowed for periodic transfers per microframe (μs) 		[ USB 2.0 sets maximum allowed time for periodic transfers per		  microframe to be 80%, that is 100 microseconds out of 125		  microseconds (full microframe). 		  However there are cases, when 80% max isochronous bandwidth is		  too limiting. For example two video streams could require 110		  microseconds of isochronous bandwidth per microframe to work		  together. ] 		Through this setting it is possible to raise the limit so that		the host controller would allow allocating more than 100		microseconds of periodic bandwidth per microframe. 		Beware, non-standard modes are usually not thoroughly tested by		hardware designers, and the hardware can malfunction when this		setting differ from default 100. What:		/sys/module/*/{coresize,initsize}Date:		Jan 2012KernelVersion:»·3.3Contact:	Kay Sievers <kay.sievers@vrfy.org>Description:	Module size in bytes. What:		/sys/module/*/taintDate:		Jan 2012KernelVersion:»·3.3Contact:	Kay Sievers <kay.sievers@vrfy.org>Description:	Module taint flags:			P - proprietary module			O - out-of-tree module			F - force-loaded module			C - staging driver module