/* * This file contains the procedures for the handling of select and poll * * Created for Linux based loosely upon Mathius Lattner's minix * patches by Peter MacDonald. Heavily edited by Linus. * * 4 February 1994 * COFF/ELF binary emulation. If the process has the STICKY_TIMEOUTS * flag set in its personality we do *not* modify the given timeout * parameter to reflect time remaining. * * 24 January 2000 * Changed sys_poll()/do_poll() to use PAGE_SIZE chunk-based allocation * of fds to overcome nfds < 16390 descriptors limit (Tigran Aivazian). */ #include <linux/kernel.h>#include <linux/sched.h>#include <linux/syscalls.h>#include <linux/export.h>#include <linux/slab.h>#include <linux/poll.h>#include <linux/personality.h> /* for STICKY_TIMEOUTS */#include <linux/file.h>#include <linux/fdtable.h>#include <linux/fs.h>#include <linux/rcupdate.h>#include <linux/hrtimer.h>#include <linux/sched/rt.h>#include <linux/freezer.h>#include <net/busy_poll.h> #include <asm/uaccess.h> /* * Estimate expected accuracy in ns from a timeval. * * After quite a bit of churning around, we've settled on * a simple thing of taking 0.1% of the timeout as the * slack, with a cap of 100 msec. * "nice" tasks get a 0.5% slack instead. * * Consider this comment an open invitation to come up with even * better solutions.. */ #define MAX_SLACK (100 * NSEC_PER_MSEC) static long __estimate_accuracy(struct timespec *tv){ long slack; int divfactor = 1000; if (tv->tv_sec < 0) return 0; if (task_nice(current) > 0) divfactor = divfactor / 5; if (tv->tv_sec > MAX_SLACK / (NSEC_PER_SEC/divfactor)) return MAX_SLACK; slack = tv->tv_nsec / divfactor; slack += tv->tv_sec * (NSEC_PER_SEC/divfactor); if (slack > MAX_SLACK) return MAX_SLACK; return slack;} long select_estimate_accuracy(struct timespec *tv){ unsigned long ret; struct timespec now; /* * Realtime tasks get a slack of 0 for obvious reasons. */ if (rt_task(current)) return 0; ktime_get_ts(&now); now = timespec_sub(*tv, now); ret = __estimate_accuracy(&now); if (ret < current->timer_slack_ns) return current->timer_slack_ns; return ret;} struct poll_table_page { struct poll_table_page * next; struct poll_table_entry * entry; struct poll_table_entry entries[0];}; #define POLL_TABLE_FULL(table) \ ((unsigned long)((table)->entry+1) > PAGE_SIZE + (unsigned long)(table)) /* * Ok, Peter made a complicated, but straightforward multiple_wait() function. * I have rewritten this, taking some shortcuts: This code may not be easy to * follow, but it should be free of race-conditions, and it's practical. If you * understand what I'm doing here, then you understand how the linux * sleep/wakeup mechanism works. * * Two very simple procedures, poll_wait() and poll_freewait() make all the * work. poll_wait() is an inline-function defined in <linux/poll.h>, * as all select/poll functions have to call it to add an entry to the * poll table. */static void __pollwait(struct file *filp, wait_queue_head_t *wait_address, poll_table *p); void poll_initwait(struct poll_wqueues *pwq){ init_poll_funcptr(&pwq->pt, __pollwait); pwq->polling_task = current; pwq->triggered = 0; pwq->error = 0; pwq->table = NULL; pwq->inline_index = 0;}EXPORT_SYMBOL(poll_initwait); static void free_poll_entry(struct poll_table_entry *entry){ remove_wait_queue(entry->wait_address, &entry->wait); fput(entry->filp);} void poll_freewait(struct poll_wqueues *pwq){ struct poll_table_page * p = pwq->table; int i; for (i = 0; i < pwq->inline_index; i++) free_poll_entry(pwq->inline_entries + i); while (p) { struct poll_table_entry * entry; struct poll_table_page *old; entry = p->entry; do { entry--; free_poll_entry(entry); } while (entry > p->entries); old = p; p = p->next; free_page((unsigned long) old); }}EXPORT_SYMBOL(poll_freewait); static struct poll_table_entry *poll_get_entry(struct poll_wqueues *p){ struct poll_table_page *table = p->table; if (p->inline_index < N_INLINE_POLL_ENTRIES) return p->inline_entries + p->inline_index++; if (!table || POLL_TABLE_FULL(table)) { struct poll_table_page *new_table; new_table = (struct poll_table_page *) __get_free_page(GFP_KERNEL); if (!new_table) { p->error = -ENOMEM; return NULL; } new_table->entry = new_table->entries; new_table->next = table; p->table = new_table; table = new_table; } return table->entry++;} static int __pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key){ struct poll_wqueues *pwq = wait->private; DECLARE_WAITQUEUE(dummy_wait, pwq->polling_task); /* * Although this function is called under waitqueue lock, LOCK * doesn't imply write barrier and the users expect write * barrier semantics on wakeup functions. The following * smp_wmb() is equivalent to smp_wmb() in try_to_wake_up() * and is paired with smp_store_mb() in poll_schedule_timeout. */ smp_wmb(); pwq->triggered = 1; /* * Perform the default wake up operation using a dummy * waitqueue. * * TODO: This is hacky but there currently is no interface to * pass in @sync. @sync is scheduled to be removed and once * that happens, wake_up_process() can be used directly. */ return default_wake_function(&dummy_wait, mode, sync, key);} static int pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key){ struct poll_table_entry *entry; entry = container_of(wait, struct poll_table_entry, wait); if (key && !((unsigned long)key & entry->key)) return 0; return __pollwake(wait, mode, sync, key);} /* Add a new entry */static void __pollwait(struct file *filp, wait_queue_head_t *wait_address, poll_table *p){ struct poll_wqueues *pwq = container_of(p, struct poll_wqueues, pt); struct poll_table_entry *entry = poll_get_entry(pwq); if (!entry) return; entry->filp = get_file(filp); entry->wait_address = wait_address; entry->key = p->_key; init_waitqueue_func_entry(&entry->wait, pollwake); entry->wait.private = pwq; add_wait_queue(wait_address, &entry->wait);} int poll_schedule_timeout(struct poll_wqueues *pwq, int state, ktime_t *expires, unsigned long slack){ int rc = -EINTR; set_current_state(state); if (!pwq->triggered) rc = schedule_hrtimeout_range(expires, slack, HRTIMER_MODE_ABS); __set_current_state(TASK_RUNNING); /* * Prepare for the next iteration. * * The following smp_store_mb() serves two purposes. First, it's * the counterpart rmb of the wmb in pollwake() such that data * written before wake up is always visible after wake up. * Second, the full barrier guarantees that triggered clearing * doesn't pass event check of the next iteration. Note that * this problem doesn't exist for the first iteration as * add_wait_queue() has full barrier semantics. */ smp_store_mb(pwq->triggered, 0); return rc;}EXPORT_SYMBOL(poll_schedule_timeout); /** * poll_select_set_timeout - helper function to setup the timeout value * @to: pointer to timespec variable for the final timeout * @sec: seconds (from user space) * @nsec: nanoseconds (from user space) * * Note, we do not use a timespec for the user space value here, That * way we can use the function for timeval and compat interfaces as well. * * Returns -EINVAL if sec/nsec are not normalized. Otherwise 0. */int poll_select_set_timeout(struct timespec *to, long sec, long nsec){ struct timespec ts = {.tv_sec = sec, .tv_nsec = nsec}; if (!timespec_valid(&ts)) return -EINVAL; /* Optimize for the zero timeout value here */ if (!sec && !nsec) { to->tv_sec = to->tv_nsec = 0; } else { ktime_get_ts(to); *to = timespec_add_safe(*to, ts); } return 0;} static int poll_select_copy_remaining(struct timespec *end_time, void __user *p, int timeval, int ret){ struct timespec rts; struct timeval rtv; if (!p) return ret; if (current->personality & STICKY_TIMEOUTS) goto sticky; /* No update for zero timeout */ if (!end_time->tv_sec && !end_time->tv_nsec) return ret; ktime_get_ts(&rts); rts = timespec_sub(*end_time, rts); if (rts.tv_sec < 0) rts.tv_sec = rts.tv_nsec = 0; if (timeval) { if (sizeof(rtv) > sizeof(rtv.tv_sec) + sizeof(rtv.tv_usec)) memset(&rtv, 0, sizeof(rtv)); rtv.tv_sec = rts.tv_sec; rtv.tv_usec = rts.tv_nsec / NSEC_PER_USEC; if (!copy_to_user(p, &rtv, sizeof(rtv))) return ret; } else if (!copy_to_user(p, &rts, sizeof(rts))) return ret; /* * If an application puts its timeval in read-only memory, we * don't want the Linux-specific update to the timeval to * cause a fault after the select has completed * successfully. However, because we're not updating the * timeval, we can't restart the system call. */ sticky: if (ret == -ERESTARTNOHAND) ret = -EINTR; return ret;} #define FDS_IN(fds, n) (fds->in + n)#define FDS_OUT(fds, n) (fds->out + n)#define FDS_EX(fds, n) (fds->ex + n) #define BITS(fds, n) (*FDS_IN(fds, n)|*FDS_OUT(fds, n)|*FDS_EX(fds, n)) static int max_select_fd(unsigned long n, fd_set_bits *fds){ unsigned long *open_fds; unsigned long set; int max; struct fdtable *fdt; /* handle last in-complete long-word first */ set = ~(~0UL << (n & (BITS_PER_LONG-1))); n /= BITS_PER_LONG; fdt = files_fdtable(current->files); open_fds = fdt->open_fds + n; max = 0; if (set) { set &= BITS(fds, n); if (set) { if (!(set & ~*open_fds)) goto get_max; return -EBADF; } } while (n) { open_fds--; n--; set = BITS(fds, n); if (!set) continue; if (set & ~*open_fds) return -EBADF; if (max) continue;get_max: do { max++; set >>= 1; } while (set); max += n * BITS_PER_LONG; } return max;} #define POLLIN_SET (POLLRDNORM | POLLRDBAND | POLLIN | POLLHUP | POLLERR)#define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR)#define POLLEX_SET (POLLPRI) static inline void wait_key_set(poll_table *wait, unsigned long in, unsigned long out, unsigned long bit, unsigned int ll_flag){ wait->_key = POLLEX_SET | ll_flag; if (in & bit) wait->_key |= POLLIN_SET; if (out & bit) wait->_key |= POLLOUT_SET;} int do_select(int n, fd_set_bits *fds, struct timespec *end_time){ ktime_t expire, *to = NULL; struct poll_wqueues table; poll_table *wait; int retval, i, timed_out = 0; unsigned long slack = 0; unsigned int busy_flag = net_busy_loop_on() ? POLL_BUSY_LOOP : 0; unsigned long busy_end = 0; rcu_read_lock(); retval = max_select_fd(n, fds); rcu_read_unlock(); if (retval < 0) return retval; n = retval; poll_initwait(&table); wait = &table.pt; if (end_time && !end_time->tv_sec && !end_time->tv_nsec) { wait->_qproc = NULL; timed_out = 1; } if (end_time && !timed_out) slack = select_estimate_accuracy(end_time); retval = 0; for (;;) { unsigned long *rinp, *routp, *rexp, *inp, *outp, *exp; bool can_busy_loop = false; inp = fds->in; outp = fds->out; exp = fds->ex; rinp = fds->res_in; routp = fds->res_out; rexp = fds->res_ex; for (i = 0; i < n; ++rinp, ++routp, ++rexp) { unsigned long in, out, ex, all_bits, bit = 1, mask, j; unsigned long res_in = 0, res_out = 0, res_ex = 0; in = *inp++; out = *outp++; ex = *exp++; all_bits = in | out | ex; if (all_bits == 0) { i += BITS_PER_LONG; continue; } for (j = 0; j < BITS_PER_LONG; ++j, ++i, bit <<= 1) { struct fd f; if (i >= n) break; if (!(bit & all_bits)) continue; f = fdget(i); if (f.file) { const struct file_operations *f_op; f_op = f.file->f_op; mask = DEFAULT_POLLMASK; if (f_op->poll) { wait_key_set(wait, in, out, bit, busy_flag); mask = (*f_op->poll)(f.file, wait); } fdput(f); if ((mask & POLLIN_SET) && (in & bit)) { res_in |= bit; retval++; wait->_qproc = NULL; } if ((mask & POLLOUT_SET) && (out & bit)) { res_out |= bit; retval++; wait->_qproc = NULL; } if ((mask & POLLEX_SET) && (ex & bit)) { res_ex |= bit; retval++; wait->_qproc = NULL; } /* got something, stop busy polling */ if (retval) { can_busy_loop = false; busy_flag = 0; /* * only remember a returned * POLL_BUSY_LOOP if we asked for it */ } else if (busy_flag & mask) can_busy_loop = true; } } if (res_in) *rinp = res_in; if (res_out) *routp = res_out; if (res_ex) *rexp = res_ex; cond_resched(); } wait->_qproc = NULL;Lines 1–500 of 1040. Load more
/* * This file contains the procedures for the handling of select and poll * * Created for Linux based loosely upon Mathius Lattner's minix * patches by Peter MacDonald. Heavily edited by Linus. * * 4 February 1994 * COFF/ELF binary emulation. If the process has the STICKY_TIMEOUTS * flag set in its personality we do *not* modify the given timeout * parameter to reflect time remaining. * * 24 January 2000 * Changed sys_poll()/do_poll() to use PAGE_SIZE chunk-based allocation * of fds to overcome nfds < 16390 descriptors limit (Tigran Aivazian). */ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/syscalls.h> #include <linux/export.h> #include <linux/slab.h> #include <linux/poll.h> #include <linux/personality.h> /* for STICKY_TIMEOUTS */ #include <linux/file.h> #include <linux/fdtable.h> #include <linux/fs.h> #include <linux/rcupdate.h> #include <linux/hrtimer.h> #include <linux/sched/rt.h> #include <linux/freezer.h> #include <net/busy_poll.h> #include <asm/uaccess.h> /* * Estimate expected accuracy in ns from a timeval. * * After quite a bit of churning around, we've settled on * a simple thing of taking 0.1% of the timeout as the * slack, with a cap of 100 msec. * "nice" tasks get a 0.5% slack instead. * * Consider this comment an open invitation to come up with even * better solutions.. */ #define MAX_SLACK (100 * NSEC_PER_MSEC) static long __estimate_accuracy(struct timespec *tv) { long slack; int divfactor = 1000; if (tv->tv_sec < 0) return 0; if (task_nice(current) > 0) divfactor = divfactor / 5; if (tv->tv_sec > MAX_SLACK / (NSEC_PER_SEC/divfactor)) return MAX_SLACK; slack = tv->tv_nsec / divfactor; slack += tv->tv_sec * (NSEC_PER_SEC/divfactor); if (slack > MAX_SLACK) return MAX_SLACK; return slack; } long select_estimate_accuracy(struct timespec *tv) { unsigned long ret; struct timespec now; /* * Realtime tasks get a slack of 0 for obvious reasons. */ if (rt_task(current)) return 0; ktime_get_ts(&now); now = timespec_sub(*tv, now); ret = __estimate_accuracy(&now); if (ret < current->timer_slack_ns) return current->timer_slack_ns; return ret; } struct poll_table_page { struct poll_table_page * next; struct poll_table_entry * entry; struct poll_table_entry entries[0]; }; #define POLL_TABLE_FULL(table) \ ((unsigned long)((table)->entry+1) > PAGE_SIZE + (unsigned long)(table)) /* * Ok, Peter made a complicated, but straightforward multiple_wait() function. * I have rewritten this, taking some shortcuts: This code may not be easy to * follow, but it should be free of race-conditions, and it's practical. If you * understand what I'm doing here, then you understand how the linux * sleep/wakeup mechanism works. * * Two very simple procedures, poll_wait() and poll_freewait() make all the * work. poll_wait() is an inline-function defined in <linux/poll.h>, * as all select/poll functions have to call it to add an entry to the * poll table. */ static void __pollwait(struct file *filp, wait_queue_head_t *wait_address, poll_table *p); void poll_initwait(struct poll_wqueues *pwq) { init_poll_funcptr(&pwq->pt, __pollwait); pwq->polling_task = current; pwq->triggered = 0; pwq->error = 0; pwq->table = NULL; pwq->inline_index = 0; } EXPORT_SYMBOL(poll_initwait); static void free_poll_entry(struct poll_table_entry *entry) { remove_wait_queue(entry->wait_address, &entry->wait); fput(entry->filp); } void poll_freewait(struct poll_wqueues *pwq) { struct poll_table_page * p = pwq->table; int i; for (i = 0; i < pwq->inline_index; i++) free_poll_entry(pwq->inline_entries + i); while (p) { struct poll_table_entry * entry; struct poll_table_page *old; entry = p->entry; do { entry--; free_poll_entry(entry); } while (entry > p->entries); old = p; p = p->next; free_page((unsigned long) old); } } EXPORT_SYMBOL(poll_freewait); static struct poll_table_entry *poll_get_entry(struct poll_wqueues *p) { struct poll_table_page *table = p->table; if (p->inline_index < N_INLINE_POLL_ENTRIES) return p->inline_entries + p->inline_index++; if (!table || POLL_TABLE_FULL(table)) { struct poll_table_page *new_table; new_table = (struct poll_table_page *) __get_free_page(GFP_KERNEL); if (!new_table) { p->error = -ENOMEM; return NULL; } new_table->entry = new_table->entries; new_table->next = table; p->table = new_table; table = new_table; } return table->entry++; } static int __pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key) { struct poll_wqueues *pwq = wait->private; DECLARE_WAITQUEUE(dummy_wait, pwq->polling_task); /* * Although this function is called under waitqueue lock, LOCK * doesn't imply write barrier and the users expect write * barrier semantics on wakeup functions. The following * smp_wmb() is equivalent to smp_wmb() in try_to_wake_up() * and is paired with smp_store_mb() in poll_schedule_timeout. */ smp_wmb(); pwq->triggered = 1; /* * Perform the default wake up operation using a dummy * waitqueue. * * TODO: This is hacky but there currently is no interface to * pass in @sync. @sync is scheduled to be removed and once * that happens, wake_up_process() can be used directly. */ return default_wake_function(&dummy_wait, mode, sync, key); } static int pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key) { struct poll_table_entry *entry; entry = container_of(wait, struct poll_table_entry, wait); if (key && !((unsigned long)key & entry->key)) return 0; return __pollwake(wait, mode, sync, key); } /* Add a new entry */ static void __pollwait(struct file *filp, wait_queue_head_t *wait_address, poll_table *p) { struct poll_wqueues *pwq = container_of(p, struct poll_wqueues, pt); struct poll_table_entry *entry = poll_get_entry(pwq); if (!entry) return; entry->filp = get_file(filp); entry->wait_address = wait_address; entry->key = p->_key; init_waitqueue_func_entry(&entry->wait, pollwake); entry->wait.private = pwq; add_wait_queue(wait_address, &entry->wait); } int poll_schedule_timeout(struct poll_wqueues *pwq, int state, ktime_t *expires, unsigned long slack) { int rc = -EINTR; set_current_state(state); if (!pwq->triggered) rc = schedule_hrtimeout_range(expires, slack, HRTIMER_MODE_ABS); __set_current_state(TASK_RUNNING); /* * Prepare for the next iteration. * * The following smp_store_mb() serves two purposes. First, it's * the counterpart rmb of the wmb in pollwake() such that data * written before wake up is always visible after wake up. * Second, the full barrier guarantees that triggered clearing * doesn't pass event check of the next iteration. Note that * this problem doesn't exist for the first iteration as * add_wait_queue() has full barrier semantics. */ smp_store_mb(pwq->triggered, 0); return rc; } EXPORT_SYMBOL(poll_schedule_timeout); /** * poll_select_set_timeout - helper function to setup the timeout value * @to: pointer to timespec variable for the final timeout * @sec: seconds (from user space) * @nsec: nanoseconds (from user space) * * Note, we do not use a timespec for the user space value here, That * way we can use the function for timeval and compat interfaces as well. * * Returns -EINVAL if sec/nsec are not normalized. Otherwise 0. */ int poll_select_set_timeout(struct timespec *to, long sec, long nsec) { struct timespec ts = {.tv_sec = sec, .tv_nsec = nsec}; if (!timespec_valid(&ts)) return -EINVAL; /* Optimize for the zero timeout value here */ if (!sec && !nsec) { to->tv_sec = to->tv_nsec = 0; } else { ktime_get_ts(to); *to = timespec_add_safe(*to, ts); } return 0; } static int poll_select_copy_remaining(struct timespec *end_time, void __user *p, int timeval, int ret) { struct timespec rts; struct timeval rtv; if (!p) return ret; if (current->personality & STICKY_TIMEOUTS) goto sticky; /* No update for zero timeout */ if (!end_time->tv_sec && !end_time->tv_nsec) return ret; ktime_get_ts(&rts); rts = timespec_sub(*end_time, rts); if (rts.tv_sec < 0) rts.tv_sec = rts.tv_nsec = 0; if (timeval) { if (sizeof(rtv) > sizeof(rtv.tv_sec) + sizeof(rtv.tv_usec)) memset(&rtv, 0, sizeof(rtv)); rtv.tv_sec = rts.tv_sec; rtv.tv_usec = rts.tv_nsec / NSEC_PER_USEC; if (!copy_to_user(p, &rtv, sizeof(rtv))) return ret; } else if (!copy_to_user(p, &rts, sizeof(rts))) return ret; /* * If an application puts its timeval in read-only memory, we * don't want the Linux-specific update to the timeval to * cause a fault after the select has completed * successfully. However, because we're not updating the * timeval, we can't restart the system call. */ sticky: if (ret == -ERESTARTNOHAND) ret = -EINTR; return ret; } #define FDS_IN(fds, n) (fds->in + n) #define FDS_OUT(fds, n) (fds->out + n) #define FDS_EX(fds, n) (fds->ex + n) #define BITS(fds, n) (*FDS_IN(fds, n)|*FDS_OUT(fds, n)|*FDS_EX(fds, n)) static int max_select_fd(unsigned long n, fd_set_bits *fds) { unsigned long *open_fds; unsigned long set; int max; struct fdtable *fdt; /* handle last in-complete long-word first */ set = ~(~0UL << (n & (BITS_PER_LONG-1))); n /= BITS_PER_LONG; fdt = files_fdtable(current->files); open_fds = fdt->open_fds + n; max = 0; if (set) { set &= BITS(fds, n); if (set) { if (!(set & ~*open_fds)) goto get_max; return -EBADF; } } while (n) { open_fds--; n--; set = BITS(fds, n); if (!set) continue; if (set & ~*open_fds) return -EBADF; if (max) continue; get_max: do { max++; set >>= 1; } while (set); max += n * BITS_PER_LONG; } return max; } #define POLLIN_SET (POLLRDNORM | POLLRDBAND | POLLIN | POLLHUP | POLLERR) #define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR) #define POLLEX_SET (POLLPRI) static inline void wait_key_set(poll_table *wait, unsigned long in, unsigned long out, unsigned long bit, unsigned int ll_flag) { wait->_key = POLLEX_SET | ll_flag; if (in & bit) wait->_key |= POLLIN_SET; if (out & bit) wait->_key |= POLLOUT_SET; } int do_select(int n, fd_set_bits *fds, struct timespec *end_time) { ktime_t expire, *to = NULL; struct poll_wqueues table; poll_table *wait; int retval, i, timed_out = 0; unsigned long slack = 0; unsigned int busy_flag = net_busy_loop_on() ? POLL_BUSY_LOOP : 0; unsigned long busy_end = 0; rcu_read_lock(); retval = max_select_fd(n, fds); rcu_read_unlock(); if (retval < 0) return retval; n = retval; poll_initwait(&table); wait = &table.pt; if (end_time && !end_time->tv_sec && !end_time->tv_nsec) { wait->_qproc = NULL; timed_out = 1; } if (end_time && !timed_out) slack = select_estimate_accuracy(end_time); retval = 0; for (;;) { unsigned long *rinp, *routp, *rexp, *inp, *outp, *exp; bool can_busy_loop = false; inp = fds->in; outp = fds->out; exp = fds->ex; rinp = fds->res_in; routp = fds->res_out; rexp = fds->res_ex; for (i = 0; i < n; ++rinp, ++routp, ++rexp) { unsigned long in, out, ex, all_bits, bit = 1, mask, j; unsigned long res_in = 0, res_out = 0, res_ex = 0; in = *inp++; out = *outp++; ex = *exp++; all_bits = in | out | ex; if (all_bits == 0) { i += BITS_PER_LONG; continue; } for (j = 0; j < BITS_PER_LONG; ++j, ++i, bit <<= 1) { struct fd f; if (i >= n) break; if (!(bit & all_bits)) continue; f = fdget(i); if (f.file) { const struct file_operations *f_op; f_op = f.file->f_op; mask = DEFAULT_POLLMASK; if (f_op->poll) { wait_key_set(wait, in, out, bit, busy_flag); mask = (*f_op->poll)(f.file, wait); } fdput(f); if ((mask & POLLIN_SET) && (in & bit)) { res_in |= bit; retval++; wait->_qproc = NULL; } if ((mask & POLLOUT_SET) && (out & bit)) { res_out |= bit; retval++; wait->_qproc = NULL; } if ((mask & POLLEX_SET) && (ex & bit)) { res_ex |= bit; retval++; wait->_qproc = NULL; } /* got something, stop busy polling */ if (retval) { can_busy_loop = false; busy_flag = 0; /* * only remember a returned * POLL_BUSY_LOOP if we asked for it */ } else if (busy_flag & mask) can_busy_loop = true; } } if (res_in) *rinp = res_in; if (res_out) *routp = res_out; if (res_ex) *rexp = res_ex; cond_resched(); } wait->_qproc = NULL;