708 lines · 19.4 KB · C
RawDownload
// SPDX-License-Identifier: GPL-2.0-or-later #include <linux/sched/task.h>#include <linux/sched/signal.h>#include <linux/freezer.h> #include "futex.h" /* * READ this before attempting to hack on futexes! * * Basic futex operation and ordering guarantees * ============================================= * * The waiter reads the futex value in user space and calls * futex_wait(). This function computes the hash bucket and acquires * the hash bucket lock. After that it reads the futex user space value * again and verifies that the data has not changed. If it has not changed * it enqueues itself into the hash bucket, releases the hash bucket lock * and schedules. * * The waker side modifies the user space value of the futex and calls * futex_wake(). This function computes the hash bucket and acquires the * hash bucket lock. Then it looks for waiters on that futex in the hash * bucket and wakes them. * * In futex wake up scenarios where no tasks are blocked on a futex, taking * the hb spinlock can be avoided and simply return. In order for this * optimization to work, ordering guarantees must exist so that the waiter * being added to the list is acknowledged when the list is concurrently being * checked by the waker, avoiding scenarios like the following: * * CPU 0                               CPU 1 * val = *futex; * sys_futex(WAIT, futex, val); *   futex_wait(futex, val); *   uval = *futex; *                                     *futex = newval; *                                     sys_futex(WAKE, futex); *                                       futex_wake(futex); *                                       if (queue_empty()) *                                         return; *   if (uval == val) *      lock(hash_bucket(futex)); *      queue(); *     unlock(hash_bucket(futex)); *     schedule(); * * This would cause the waiter on CPU 0 to wait forever because it * missed the transition of the user space value from val to newval * and the waker did not find the waiter in the hash bucket queue. * * The correct serialization ensures that a waiter either observes * the changed user space value before blocking or is woken by a * concurrent waker: * * CPU 0                                 CPU 1 * val = *futex; * sys_futex(WAIT, futex, val); *   futex_wait(futex, val); * *   waiters++; (a) *   smp_mb(); (A) <-- paired with -. *                                  | *   lock(hash_bucket(futex));      | *                                  | *   uval = *futex;                 | *                                  |        *futex = newval; *                                  |        sys_futex(WAKE, futex); *                                  |          futex_wake(futex); *                                  | *                                  `--------> smp_mb(); (B) *   if (uval == val) *     queue(); *     unlock(hash_bucket(futex)); *     schedule();                         if (waiters) *                                           lock(hash_bucket(futex)); *   else                                    wake_waiters(futex); *     waiters--; (b)                        unlock(hash_bucket(futex)); * * Where (A) orders the waiters increment and the futex value read through * atomic operations (see futex_hb_waiters_inc) and where (B) orders the write * to futex and the waiters read (see futex_hb_waiters_pending()). * * This yields the following case (where X:=waiters, Y:=futex): * *	X = Y = 0 * *	w[X]=1		w[Y]=1 *	MB		MB *	r[Y]=y		r[X]=x * * Which guarantees that x==0 && y==0 is impossible; which translates back into * the guarantee that we cannot both miss the futex variable change and the * enqueue. * * Note that a new waiter is accounted for in (a) even when it is possible that * the wait call can return error, in which case we backtrack from it in (b). * Refer to the comment in futex_q_lock(). * * Similarly, in order to account for waiters being requeued on another * address we always increment the waiters for the destination bucket before * acquiring the lock. It then decrements them again  after releasing it - * the code that actually moves the futex(es) between hash buckets (requeue_futex) * will do the additional required waiter count housekeeping. This is done for * double_lock_hb() and double_unlock_hb(), respectively. */ /* * The hash bucket lock must be held when this is called. * Afterwards, the futex_q must not be accessed. Callers * must ensure to later call wake_up_q() for the actual * wakeups to occur. */void futex_wake_mark(struct wake_q_head *wake_q, struct futex_q *q){	struct task_struct *p = q->task; 	if (WARN(q->pi_state || q->rt_waiter, "refusing to wake PI futex\n"))		return; 	get_task_struct(p);	__futex_unqueue(q);	/*	 * The waiting task can free the futex_q as soon as q->lock_ptr = NULL	 * is written, without taking any locks. This is possible in the event	 * of a spurious wakeup, for example. A memory barrier is required here	 * to prevent the following store to lock_ptr from getting ahead of the	 * plist_del in __futex_unqueue().	 */	smp_store_release(&q->lock_ptr, NULL); 	/*	 * Queue the task for later wakeup for after we've released	 * the hb->lock.	 */	wake_q_add_safe(wake_q, p);} /* * Wake up waiters matching bitset queued on this futex (uaddr). */int futex_wake(u32 __user *uaddr, unsigned int flags, int nr_wake, u32 bitset){	struct futex_hash_bucket *hb;	struct futex_q *this, *next;	union futex_key key = FUTEX_KEY_INIT;	int ret;	DEFINE_WAKE_Q(wake_q); 	if (!bitset)		return -EINVAL; 	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &key, FUTEX_READ);	if (unlikely(ret != 0))		return ret; 	hb = futex_hash(&key); 	/* Make sure we really have tasks to wakeup */	if (!futex_hb_waiters_pending(hb))		return ret; 	spin_lock(&hb->lock); 	plist_for_each_entry_safe(this, next, &hb->chain, list) {		if (futex_match (&this->key, &key)) {			if (this->pi_state || this->rt_waiter) {				ret = -EINVAL;				break;			} 			/* Check if one of the bits is set in both bitsets */			if (!(this->bitset & bitset))				continue; 			futex_wake_mark(&wake_q, this);			if (++ret >= nr_wake)				break;		}	} 	spin_unlock(&hb->lock);	wake_up_q(&wake_q);	return ret;} static int futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr){	unsigned int op =	  (encoded_op & 0x70000000) >> 28;	unsigned int cmp =	  (encoded_op & 0x0f000000) >> 24;	int oparg = sign_extend32((encoded_op & 0x00fff000) >> 12, 11);	int cmparg = sign_extend32(encoded_op & 0x00000fff, 11);	int oldval, ret; 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) {		if (oparg < 0 || oparg > 31) {			char comm[sizeof(current->comm)];			/*			 * kill this print and return -EINVAL when userspace			 * is sane again			 */			pr_info_ratelimited("futex_wake_op: %s tries to shift op by %d; fix this program\n",					get_task_comm(comm, current), oparg);			oparg &= 31;		}		oparg = 1 << oparg;	} 	pagefault_disable();	ret = arch_futex_atomic_op_inuser(op, oparg, &oldval, uaddr);	pagefault_enable();	if (ret)		return ret; 	switch (cmp) {	case FUTEX_OP_CMP_EQ:		return oldval == cmparg;	case FUTEX_OP_CMP_NE:		return oldval != cmparg;	case FUTEX_OP_CMP_LT:		return oldval < cmparg;	case FUTEX_OP_CMP_GE:		return oldval >= cmparg;	case FUTEX_OP_CMP_LE:		return oldval <= cmparg;	case FUTEX_OP_CMP_GT:		return oldval > cmparg;	default:		return -ENOSYS;	}} /* * Wake up all waiters hashed on the physical page that is mapped * to this virtual address: */int futex_wake_op(u32 __user *uaddr1, unsigned int flags, u32 __user *uaddr2,		  int nr_wake, int nr_wake2, int op){	union futex_key key1 = FUTEX_KEY_INIT, key2 = FUTEX_KEY_INIT;	struct futex_hash_bucket *hb1, *hb2;	struct futex_q *this, *next;	int ret, op_ret;	DEFINE_WAKE_Q(wake_q); retry:	ret = get_futex_key(uaddr1, flags & FLAGS_SHARED, &key1, FUTEX_READ);	if (unlikely(ret != 0))		return ret;	ret = get_futex_key(uaddr2, flags & FLAGS_SHARED, &key2, FUTEX_WRITE);	if (unlikely(ret != 0))		return ret; 	hb1 = futex_hash(&key1);	hb2 = futex_hash(&key2); retry_private:	double_lock_hb(hb1, hb2);	op_ret = futex_atomic_op_inuser(op, uaddr2);	if (unlikely(op_ret < 0)) {		double_unlock_hb(hb1, hb2); 		if (!IS_ENABLED(CONFIG_MMU) ||		    unlikely(op_ret != -EFAULT && op_ret != -EAGAIN)) {			/*			 * we don't get EFAULT from MMU faults if we don't have			 * an MMU, but we might get them from range checking			 */			ret = op_ret;			return ret;		} 		if (op_ret == -EFAULT) {			ret = fault_in_user_writeable(uaddr2);			if (ret)				return ret;		} 		cond_resched();		if (!(flags & FLAGS_SHARED))			goto retry_private;		goto retry;	} 	plist_for_each_entry_safe(this, next, &hb1->chain, list) {		if (futex_match (&this->key, &key1)) {			if (this->pi_state || this->rt_waiter) {				ret = -EINVAL;				goto out_unlock;			}			futex_wake_mark(&wake_q, this);			if (++ret >= nr_wake)				break;		}	} 	if (op_ret > 0) {		op_ret = 0;		plist_for_each_entry_safe(this, next, &hb2->chain, list) {			if (futex_match (&this->key, &key2)) {				if (this->pi_state || this->rt_waiter) {					ret = -EINVAL;					goto out_unlock;				}				futex_wake_mark(&wake_q, this);				if (++op_ret >= nr_wake2)					break;			}		}		ret += op_ret;	} out_unlock:	double_unlock_hb(hb1, hb2);	wake_up_q(&wake_q);	return ret;} static long futex_wait_restart(struct restart_block *restart); /** * futex_wait_queue() - futex_queue() and wait for wakeup, timeout, or signal * @hb:		the futex hash bucket, must be locked by the caller * @q:		the futex_q to queue up on * @timeout:	the prepared hrtimer_sleeper, or null for no timeout */void futex_wait_queue(struct futex_hash_bucket *hb, struct futex_q *q,			    struct hrtimer_sleeper *timeout){	/*	 * The task state is guaranteed to be set before another task can	 * wake it. set_current_state() is implemented using smp_store_mb() and	 * futex_queue() calls spin_unlock() upon completion, both serializing	 * access to the hash list and forcing another memory barrier.	 */	set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE);	futex_queue(q, hb); 	/* Arm the timer */	if (timeout)		hrtimer_sleeper_start_expires(timeout, HRTIMER_MODE_ABS); 	/*	 * If we have been removed from the hash list, then another task	 * has tried to wake us, and we can skip the call to schedule().	 */	if (likely(!plist_node_empty(&q->list))) {		/*		 * If the timer has already expired, current will already be		 * flagged for rescheduling. Only call schedule if there		 * is no timeout, or if it has yet to expire.		 */		if (!timeout || timeout->task)			schedule();	}	__set_current_state(TASK_RUNNING);} /** * unqueue_multiple - Remove various futexes from their hash bucket * @v:	   The list of futexes to unqueue * @count: Number of futexes in the list * * Helper to unqueue a list of futexes. This can't fail. * * Return: *  - >=0 - Index of the last futex that was awoken; *  - -1  - No futex was awoken */static int unqueue_multiple(struct futex_vector *v, int count){	int ret = -1, i; 	for (i = 0; i < count; i++) {		if (!futex_unqueue(&v[i].q))			ret = i;	} 	return ret;} /** * futex_wait_multiple_setup - Prepare to wait and enqueue multiple futexes * @vs:		The futex list to wait on * @count:	The size of the list * @woken:	Index of the last woken futex, if any. Used to notify the *		caller that it can return this index to userspace (return parameter) * * Prepare multiple futexes in a single step and enqueue them. This may fail if * the futex list is invalid or if any futex was already awoken. On success the * task is ready to interruptible sleep. * * Return: *  -  1 - One of the futexes was woken by another thread *  -  0 - Success *  - <0 - -EFAULT, -EWOULDBLOCK or -EINVAL */static int futex_wait_multiple_setup(struct futex_vector *vs, int count, int *woken){	struct futex_hash_bucket *hb;	bool retry = false;	int ret, i;	u32 uval; 	/*	 * Enqueuing multiple futexes is tricky, because we need to enqueue	 * each futex on the list before dealing with the next one to avoid	 * deadlocking on the hash bucket. But, before enqueuing, we need to	 * make sure that current->state is TASK_INTERRUPTIBLE, so we don't	 * lose any wake events, which cannot be done before the get_futex_key	 * of the next key, because it calls get_user_pages, which can sleep.	 * Thus, we fetch the list of futexes keys in two steps, by first	 * pinning all the memory keys in the futex key, and only then we read	 * each key and queue the corresponding futex.	 *	 * Private futexes doesn't need to recalculate hash in retry, so skip	 * get_futex_key() when retrying.	 */retry:	for (i = 0; i < count; i++) {		if ((vs[i].w.flags & FUTEX_PRIVATE_FLAG) && retry)			continue; 		ret = get_futex_key(u64_to_user_ptr(vs[i].w.uaddr),				    !(vs[i].w.flags & FUTEX_PRIVATE_FLAG),				    &vs[i].q.key, FUTEX_READ); 		if (unlikely(ret))			return ret;	} 	set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE); 	for (i = 0; i < count; i++) {		u32 __user *uaddr = (u32 __user *)(unsigned long)vs[i].w.uaddr;		struct futex_q *q = &vs[i].q;		u32 val = (u32)vs[i].w.val; 		hb = futex_q_lock(q);		ret = futex_get_value_locked(&uval, uaddr); 		if (!ret && uval == val) {			/*			 * The bucket lock can't be held while dealing with the			 * next futex. Queue each futex at this moment so hb can			 * be unlocked.			 */			futex_queue(q, hb);			continue;		} 		futex_q_unlock(hb);		__set_current_state(TASK_RUNNING); 		/*		 * Even if something went wrong, if we find out that a futex		 * was woken, we don't return error and return this index to		 * userspace		 */		*woken = unqueue_multiple(vs, i);		if (*woken >= 0)			return 1; 		if (ret) {			/*			 * If we need to handle a page fault, we need to do so			 * without any lock and any enqueued futex (otherwise			 * we could lose some wakeup). So we do it here, after			 * undoing all the work done so far. In success, we			 * retry all the work.			 */			if (get_user(uval, uaddr))				return -EFAULT; 			retry = true;			goto retry;		} 		if (uval != val)			return -EWOULDBLOCK;	} 	return 0;} /** * futex_sleep_multiple - Check sleeping conditions and sleep * @vs:    List of futexes to wait for * @count: Length of vs * @to:    Timeout * * Sleep if and only if the timeout hasn't expired and no futex on the list has * been woken up. */static void futex_sleep_multiple(struct futex_vector *vs, unsigned int count,				 struct hrtimer_sleeper *to){	if (to && !to->task)		return;

Lines 1–500 of 708.