# SPDX-License-Identifier: GPL-2.0-only## fbdev configuration# menuconfig FB tristate "Support for frame buffer device drivers" select FB_CORE select FB_NOTIFY help The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and allows application software to access the graphics hardware through a well-defined interface, so the software doesn't need to know anything about the low-level (hardware register) stuff. Frame buffer devices work identically across the different architectures supported by Linux and make the implementation of application programs easier and more portable; at this point, an X server exists which uses the frame buffer device exclusively. On several non-X86 architectures, the frame buffer device is the only way to use the graphics hardware. The device is accessed through special device nodes, usually located in the /dev directory, i.e. /dev/fb*. You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.rst> and the Framebuffer-HOWTO at <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more information. This enables support for native frame buffer device (fbdev) drivers. The DRM subsystem provides support for emulated frame buffer devices on top of KMS drivers, but this option allows legacy fbdev drivers to be enabled as well. Say Y here and to the driver for your graphics board below if you are compiling a kernel for a non-x86 architecture. If you are compiling for the x86 architecture, you can say Y if you want to play with it, but it is not essential. Please note that running graphical applications that directly touch the hardware (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. config FB_HECUBA tristate depends on FB select FB_SYSMEM_HELPERS_DEFERRED config FB_SVGALIB tristate depends on FB help Common utility functions useful to fbdev drivers of VGA-based cards. config FB_MACMODES tristate depends on FB config FB_GRVGA tristate "Aeroflex Gaisler framebuffer support" depends on FB && SPARC select FB_IOMEM_HELPERS help This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler. config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS help This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. If you have a PCI-based system, this enables support for these chips: GD-543x, GD-544x, GD-5480. Please read the file <file:Documentation/fb/cirrusfb.rst>. Say N unless you have such a graphics board or plan to get one before you next recompile the kernel. config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS help This is the frame buffer device driver for cards based on the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. The driver was tested on the following cards: Diamond FireGL 1000 PRO AGP ELSA Gloria Synergy PCI Appian Jeronimo PRO (both heads) PCI 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC ASK Graphic Blaster Exxtreme AGP To compile this driver as a module, choose M here: the module will be called pm2fb. config FB_PM2_FIFO_DISCONNECT bool "enable FIFO disconnect feature" depends on FB_PM2 && PCI help Support the Permedia2 FIFO disconnect feature. config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && ARCH_ACORN select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If unsure, say N. config FB_CLPS711X tristate "CLPS711X LCD support" depends on FB && (ARCH_CLPS711X || COMPILE_TEST) depends on LCD_CLASS_DEVICE select FB_IOMEM_HELPERS select FB_MODE_HELPERS select VIDEOMODE_HELPERS help Say Y to enable the Framebuffer driver for the Cirrus Logic CLPS711X CPUs. config FB_SA1100 bool "SA-1100 LCD support" depends on (FB = y) && ARM && ARCH_SA1100 select FB_IOMEM_HELPERS help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer devices. If you plan to use the LCD display with your SA-1100 system, say Y here. config FB_IMX tristate "Freescale i.MX1/21/25/27 LCD support" depends on FB && HAVE_CLK && HAS_IOMEM depends on ARCH_MXC || COMPILE_TEST depends on LCD_CLASS_DEVICE select FB_IOMEM_HELPERS select FB_MODE_HELPERS select VIDEOMODE_HELPERS config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && HAS_IOPORT && (BROKEN || !SPARC64) select FB_IOMEM_HELPERS help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. Say Y if you have a NetWinder or a graphics card containing this device, otherwise say N. config FB_CYBER2000_DDC bool "DDC for CyberPro support" depends on FB_CYBER2000 select FB_DDC default y help Say Y here if you want DDC support for your CyberPro graphics card. This is only I2C bus support, driver does not use EDID. config FB_CYBER2000_I2C bool "CyberPro 2000/2010/5000 I2C support" depends on FB_CYBER2000 && I2C && ARCH_NETWINDER depends on I2C=y || FB_CYBER2000=m select I2C_ALGOBIT help Enable support for the I2C video decoder interface on the Integraphics CyberPro 20x0 and 5000 VGA chips. This is used on the Netwinder machines for the SAA7111 video capture. config FB_APOLLO bool depends on (FB = y) && APOLLO default y select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS config FB_Q40 bool depends on (FB = y) && Q40 default y select FB_IOMEM_HELPERS config FB_AMIGA tristate "Amiga native chipset support" depends on FB && AMIGA select FB_IOMEM_FOPS help This is the frame buffer device driver for the builtin graphics chipset found in Amigas. To compile this driver as a module, choose M here: the module will be called amifb. config FB_AMIGA_OCS bool "Amiga OCS chipset support" depends on FB_AMIGA help This enables support for the original Agnus and Denise video chips, found in the Amiga 1000 and most A500's and A2000's. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_AMIGA_ECS bool "Amiga ECS chipset support" depends on FB_AMIGA help This enables support for the Enhanced Chip Set, found in later A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_AMIGA_AGA bool "Amiga AGA chipset support" depends on FB_AMIGA help This enables support for the Advanced Graphics Architecture (also known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T and CD32. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on (FB = y) && ZORRO select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). config FB_ARC tristate "Arc Monochrome LCD board support" depends on FB && HAS_IOPORT && (X86 || COMPILE_TEST) select FB_SYSMEM_HELPERS_DEFERRED help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix of 2*n chips. This driver was tested with a 128x64 panel. This driver supports it for use with x86 SBCs through a 16 bit GPIO interface (8 bit data, 8 bit control). If you anticipate using this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. config FB_ATARI bool "Atari native chipset support" depends on (FB = y) && ATARI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS help This is the frame buffer device driver for the builtin graphics chipset found in Ataris. config FB_OF tristate "Open Firmware frame buffer device support" depends on FB && PPC && (!PPC_PSERIES || PCI) depends on !DRM_OFDRM select APERTURE_HELPERS select FB_IOMEM_HELPERS select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics board. config FB_CONTROL bool "Apple \"control\" display support" depends on (FB = y) && ((PPC_PMAC && PPC32) || COMPILE_TEST) select FB_IOMEM_HELPERS select FB_MACMODES help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. config FB_PLATINUM bool "Apple \"platinum\" display support" depends on (FB = y) && PPC_PMAC && PPC32 select FB_IOMEM_HELPERS select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) select FB_IOMEM_HELPERS select FB_MACMODES help This driver supports a frame buffer for the "valkyrie" graphics adapter in some Power Macintoshes. config FB_CT65550 bool "Chips 65550 display support" depends on (FB = y) && PPC32 && PCI select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. config FB_ASILIANT bool "Asiliant (Chips) 69000 display support" depends on (FB = y) && PCI select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Asiliant 69030 chipset config FB_IMSTT bool "IMS Twin Turbo display support" depends on (FB = y) && PCI select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS select FB_MACMODES if PPC_PMAC help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && X86 select APERTURE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS select VGASTATE select FONT_8x16 if FRAMEBUFFER_CONSOLE help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. To compile this driver as a module, choose M here: the module will be called vga16fb. config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS select STI_CORE default y help Enabling this option will implement the linux framebuffer device using calls to the STI BIOS routines for initialisation. If you enable this option, you will get a planar framebuffer device /dev/fb which will work on the most common HP graphic cards of the NGLE family, including the artist chips (in the 7xx and Bxxx series), HCRX, HCRX24, CRX, CRX24 and VisEG series. It is safe to enable this option, so you should probably say "Y". config FB_MAC bool "Generic Macintosh display support" depends on (FB = y) && MAC select FB_IOMEM_HELPERS select FB_MACMODES config FB_HP300 bool depends on (FB = y) && DIO select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS default y config FB_TGA tristate "TGA/SFB+ framebuffer support" depends on FB depends on PCI || TC depends on ALPHA || TC select BITREVERSE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS help This is the frame buffer device driver for generic TGA and SFB+ graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 TURBOchannel cards, also known as PMAGD-A, -B and -C. Due to hardware limitations ZLX-E2 and E3 cards are not supported for DECstation 5000/200 systems. Additionally due to firmware limitations these cards may cause troubles with booting DECstation 5000/240 and /260 systems, but are fully supported under Linux if you manage to get it going. ;-) Say Y if you have one of those. config FB_UVESA tristate "Userspace VESA VGA graphics support" depends on FB && CONNECTOR depends on !UML select FB_IOMEM_HELPERS select FB_MODE_HELPERS help This is the frame buffer driver for generic VBE 2.0 compliant graphic cards. It can also take advantage of VBE 3.0 features, such as refresh rate adjustment. This driver generally provides more features than vesafb but requires a userspace helper application called 'v86d'. See <file:Documentation/fb/uvesafb.rst> for more information. If unsure, say N. config FB_VESA bool "VESA VGA graphics support" depends on (FB = y) && X86 select APERTURE_HELPERS select FB_IOMEM_HELPERS select SYSFB help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. You will get a boot time penguin logo at no additional cost. Please read <file:Documentation/fb/vesafb.rst>. If unsure, say Y. config FB_EFI bool "EFI-based Framebuffer Support" depends on (FB = y) && EFI select APERTURE_HELPERS select DRM_PANEL_ORIENTATION_QUIRKS select FB_IOMEM_HELPERS select SYSFB help This is the EFI frame buffer device driver. If the firmware on your platform is EFI 1.10 or UEFI 2.0, select Y to add support for using the EFI framebuffer as your console. config FB_N411 tristate "N411 Apollo/Hecuba devkit support" depends on FB && X86 && MMU select FB_HECUBA help This enables support for the Apollo display controller in its Hecuba form using the n411 devkit. config FB_GBE bool "SGI Graphics Backend frame buffer support" depends on (FB = y) && HAS_IOMEM depends on SGI_IP32 || COMPILE_TEST select FB_IOMEM_HELPERS help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. config FB_GBE_MEM int "Video memory size in MB" depends on FB_GBE default 4 help This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. config FB_SBUS bool "SBUS and UPA framebuffers" depends on (FB = y) && SPARC help Say Y if you want support for SBUS or UPA based frame buffer device. config FB_SBUS_HELPERS bool select FB_CFB_COPYAREA select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS config FB_BW2 bool "BWtwo support" depends on (FB = y) && (SPARC && FB_SBUS) select FB_SBUS_HELPERS help This is the frame buffer device driver for the BWtwo frame buffer. config FB_CG3 bool "CGthree support" depends on (FB = y) && (SPARC && FB_SBUS) select FB_SBUS_HELPERS help This is the frame buffer device driver for the CGthree frame buffer. config FB_CG6Lines 1–500 of 1805. Load more
# SPDX-License-Identifier: GPL-2.0-only # # fbdev configuration # menuconfig FB tristate "Support for frame buffer device drivers" select FB_CORE select FB_NOTIFY help The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and allows application software to access the graphics hardware through a well-defined interface, so the software doesn't need to know anything about the low-level (hardware register) stuff. Frame buffer devices work identically across the different architectures supported by Linux and make the implementation of application programs easier and more portable; at this point, an X server exists which uses the frame buffer device exclusively. On several non-X86 architectures, the frame buffer device is the only way to use the graphics hardware. The device is accessed through special device nodes, usually located in the /dev directory, i.e. /dev/fb*. You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.rst> and the Framebuffer-HOWTO at <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more information. This enables support for native frame buffer device (fbdev) drivers. The DRM subsystem provides support for emulated frame buffer devices on top of KMS drivers, but this option allows legacy fbdev drivers to be enabled as well. Say Y here and to the driver for your graphics board below if you are compiling a kernel for a non-x86 architecture. If you are compiling for the x86 architecture, you can say Y if you want to play with it, but it is not essential. Please note that running graphical applications that directly touch the hardware (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. config FB_HECUBA tristate depends on FB select FB_SYSMEM_HELPERS_DEFERRED config FB_SVGALIB tristate depends on FB help Common utility functions useful to fbdev drivers of VGA-based cards. config FB_MACMODES tristate depends on FB config FB_GRVGA tristate "Aeroflex Gaisler framebuffer support" depends on FB && SPARC select FB_IOMEM_HELPERS help This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler. config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS help This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. If you have a PCI-based system, this enables support for these chips: GD-543x, GD-544x, GD-5480. Please read the file <file:Documentation/fb/cirrusfb.rst>. Say N unless you have such a graphics board or plan to get one before you next recompile the kernel. config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS help This is the frame buffer device driver for cards based on the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. The driver was tested on the following cards: Diamond FireGL 1000 PRO AGP ELSA Gloria Synergy PCI Appian Jeronimo PRO (both heads) PCI 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC ASK Graphic Blaster Exxtreme AGP To compile this driver as a module, choose M here: the module will be called pm2fb. config FB_PM2_FIFO_DISCONNECT bool "enable FIFO disconnect feature" depends on FB_PM2 && PCI help Support the Permedia2 FIFO disconnect feature. config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && ARCH_ACORN select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If unsure, say N. config FB_CLPS711X tristate "CLPS711X LCD support" depends on FB && (ARCH_CLPS711X || COMPILE_TEST) depends on LCD_CLASS_DEVICE select FB_IOMEM_HELPERS select FB_MODE_HELPERS select VIDEOMODE_HELPERS help Say Y to enable the Framebuffer driver for the Cirrus Logic CLPS711X CPUs. config FB_SA1100 bool "SA-1100 LCD support" depends on (FB = y) && ARM && ARCH_SA1100 select FB_IOMEM_HELPERS help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer devices. If you plan to use the LCD display with your SA-1100 system, say Y here. config FB_IMX tristate "Freescale i.MX1/21/25/27 LCD support" depends on FB && HAVE_CLK && HAS_IOMEM depends on ARCH_MXC || COMPILE_TEST depends on LCD_CLASS_DEVICE select FB_IOMEM_HELPERS select FB_MODE_HELPERS select VIDEOMODE_HELPERS config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && HAS_IOPORT && (BROKEN || !SPARC64) select FB_IOMEM_HELPERS help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. Say Y if you have a NetWinder or a graphics card containing this device, otherwise say N. config FB_CYBER2000_DDC bool "DDC for CyberPro support" depends on FB_CYBER2000 select FB_DDC default y help Say Y here if you want DDC support for your CyberPro graphics card. This is only I2C bus support, driver does not use EDID. config FB_CYBER2000_I2C bool "CyberPro 2000/2010/5000 I2C support" depends on FB_CYBER2000 && I2C && ARCH_NETWINDER depends on I2C=y || FB_CYBER2000=m select I2C_ALGOBIT help Enable support for the I2C video decoder interface on the Integraphics CyberPro 20x0 and 5000 VGA chips. This is used on the Netwinder machines for the SAA7111 video capture. config FB_APOLLO bool depends on (FB = y) && APOLLO default y select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS config FB_Q40 bool depends on (FB = y) && Q40 default y select FB_IOMEM_HELPERS config FB_AMIGA tristate "Amiga native chipset support" depends on FB && AMIGA select FB_IOMEM_FOPS help This is the frame buffer device driver for the builtin graphics chipset found in Amigas. To compile this driver as a module, choose M here: the module will be called amifb. config FB_AMIGA_OCS bool "Amiga OCS chipset support" depends on FB_AMIGA help This enables support for the original Agnus and Denise video chips, found in the Amiga 1000 and most A500's and A2000's. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_AMIGA_ECS bool "Amiga ECS chipset support" depends on FB_AMIGA help This enables support for the Enhanced Chip Set, found in later A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_AMIGA_AGA bool "Amiga AGA chipset support" depends on FB_AMIGA help This enables support for the Advanced Graphics Architecture (also known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T and CD32. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on (FB = y) && ZORRO select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). config FB_ARC tristate "Arc Monochrome LCD board support" depends on FB && HAS_IOPORT && (X86 || COMPILE_TEST) select FB_SYSMEM_HELPERS_DEFERRED help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix of 2*n chips. This driver was tested with a 128x64 panel. This driver supports it for use with x86 SBCs through a 16 bit GPIO interface (8 bit data, 8 bit control). If you anticipate using this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. config FB_ATARI bool "Atari native chipset support" depends on (FB = y) && ATARI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS help This is the frame buffer device driver for the builtin graphics chipset found in Ataris. config FB_OF tristate "Open Firmware frame buffer device support" depends on FB && PPC && (!PPC_PSERIES || PCI) depends on !DRM_OFDRM select APERTURE_HELPERS select FB_IOMEM_HELPERS select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics board. config FB_CONTROL bool "Apple \"control\" display support" depends on (FB = y) && ((PPC_PMAC && PPC32) || COMPILE_TEST) select FB_IOMEM_HELPERS select FB_MACMODES help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. config FB_PLATINUM bool "Apple \"platinum\" display support" depends on (FB = y) && PPC_PMAC && PPC32 select FB_IOMEM_HELPERS select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) select FB_IOMEM_HELPERS select FB_MACMODES help This driver supports a frame buffer for the "valkyrie" graphics adapter in some Power Macintoshes. config FB_CT65550 bool "Chips 65550 display support" depends on (FB = y) && PPC32 && PCI select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. config FB_ASILIANT bool "Asiliant (Chips) 69000 display support" depends on (FB = y) && PCI select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Asiliant 69030 chipset config FB_IMSTT bool "IMS Twin Turbo display support" depends on (FB = y) && PCI select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS select FB_MACMODES if PPC_PMAC help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && X86 select APERTURE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS select VGASTATE select FONT_8x16 if FRAMEBUFFER_CONSOLE help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. To compile this driver as a module, choose M here: the module will be called vga16fb. config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS select STI_CORE default y help Enabling this option will implement the linux framebuffer device using calls to the STI BIOS routines for initialisation. If you enable this option, you will get a planar framebuffer device /dev/fb which will work on the most common HP graphic cards of the NGLE family, including the artist chips (in the 7xx and Bxxx series), HCRX, HCRX24, CRX, CRX24 and VisEG series. It is safe to enable this option, so you should probably say "Y". config FB_MAC bool "Generic Macintosh display support" depends on (FB = y) && MAC select FB_IOMEM_HELPERS select FB_MACMODES config FB_HP300 bool depends on (FB = y) && DIO select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS default y config FB_TGA tristate "TGA/SFB+ framebuffer support" depends on FB depends on PCI || TC depends on ALPHA || TC select BITREVERSE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS help This is the frame buffer device driver for generic TGA and SFB+ graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 TURBOchannel cards, also known as PMAGD-A, -B and -C. Due to hardware limitations ZLX-E2 and E3 cards are not supported for DECstation 5000/200 systems. Additionally due to firmware limitations these cards may cause troubles with booting DECstation 5000/240 and /260 systems, but are fully supported under Linux if you manage to get it going. ;-) Say Y if you have one of those. config FB_UVESA tristate "Userspace VESA VGA graphics support" depends on FB && CONNECTOR depends on !UML select FB_IOMEM_HELPERS select FB_MODE_HELPERS help This is the frame buffer driver for generic VBE 2.0 compliant graphic cards. It can also take advantage of VBE 3.0 features, such as refresh rate adjustment. This driver generally provides more features than vesafb but requires a userspace helper application called 'v86d'. See <file:Documentation/fb/uvesafb.rst> for more information. If unsure, say N. config FB_VESA bool "VESA VGA graphics support" depends on (FB = y) && X86 select APERTURE_HELPERS select FB_IOMEM_HELPERS select SYSFB help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. You will get a boot time penguin logo at no additional cost. Please read <file:Documentation/fb/vesafb.rst>. If unsure, say Y. config FB_EFI bool "EFI-based Framebuffer Support" depends on (FB = y) && EFI select APERTURE_HELPERS select DRM_PANEL_ORIENTATION_QUIRKS select FB_IOMEM_HELPERS select SYSFB help This is the EFI frame buffer device driver. If the firmware on your platform is EFI 1.10 or UEFI 2.0, select Y to add support for using the EFI framebuffer as your console. config FB_N411 tristate "N411 Apollo/Hecuba devkit support" depends on FB && X86 && MMU select FB_HECUBA help This enables support for the Apollo display controller in its Hecuba form using the n411 devkit. config FB_GBE bool "SGI Graphics Backend frame buffer support" depends on (FB = y) && HAS_IOMEM depends on SGI_IP32 || COMPILE_TEST select FB_IOMEM_HELPERS help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. config FB_GBE_MEM int "Video memory size in MB" depends on FB_GBE default 4 help This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. config FB_SBUS bool "SBUS and UPA framebuffers" depends on (FB = y) && SPARC help Say Y if you want support for SBUS or UPA based frame buffer device. config FB_SBUS_HELPERS bool select FB_CFB_COPYAREA select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT select FB_IOMEM_FOPS config FB_BW2 bool "BWtwo support" depends on (FB = y) && (SPARC && FB_SBUS) select FB_SBUS_HELPERS help This is the frame buffer device driver for the BWtwo frame buffer. config FB_CG3 bool "CGthree support" depends on (FB = y) && (SPARC && FB_SBUS) select FB_SBUS_HELPERS help This is the frame buffer device driver for the CGthree frame buffer. config FB_CG6