#include "u.h"#include "lib.h"#include "mem.h"#include "dat.h"#include "fns.h"#include "io.h" #include "etherif.h"#include "ether8390.h" /* * Driver written for the 'Notebook Computer Ethernet LAN Adapter', * a plug-in to the bus-slot on the rear of the Gateway NOMAD 425DXL * laptop. The manual says NE2000 compatible. * The interface appears to be pretty well described in the National * Semiconductor Local Area Network Databook (1992) as one of the * AT evaluation cards. * * The NE2000 is really just a DP8390[12] plus a data port * and a reset port. */enum {	Data		= 0x10,		/* offset from I/O base of data port */	Reset		= 0x1F,		/* offset from I/O base of reset port */}; typedef struct Ctlr Ctlr;typedef struct Ctlr {	Pcidev*	pcidev;	Ctlr*	next;	int	active;} Ctlr; static Ctlr* ctlrhead;static Ctlr* ctlrtail; static struct {	char*	name;	int	id;} ne2000pci[] = {	{ "Realtek 8029",	(0x8029<<16)|0x10EC, },	{ "Winbond 89C940",	(0x0940<<16)|0x1050, },	{ nil },}; static int nextport;static ulong portsinuse[16]; static intinuse(ulong port){	int i; 	for (i = 0; i < nextport; i++)		if (portsinuse[i] == port)			return 1; 	/* port is available.  mark it as used now. */	if (nextport >= nelem(portsinuse))		return 1;		/* too many ports in use */	portsinuse[nextport++] = port;	return 0;} static Ctlr*ne2000match(Ether* edev, int id){	int port;	Pcidev *p;	Ctlr *ctlr; 	/*	 * Any adapter matches if no edev->port is supplied,	 * otherwise the ports must match.	 */	for(ctlr = ctlrhead; ctlr != nil; ctlr = ctlr->next){		if(ctlr->active)			continue;		p = ctlr->pcidev;		if(((p->did<<16)|p->vid) != id)			continue;		port = p->mem[0].bar & ~0x01;		if(edev->port != 0 && edev->port != port)			continue; 		/*		 * It suffices to fill these in,		 * the rest is gleaned from the card.		 */		edev->port = port;		edev->irq = p->intl; 		ctlr->active = 1;		return ctlr;	} 	return nil;} static voidne2000pnp(Ether* edev){	int i, id;	Pcidev *p;	Ctlr *ctlr; 	/*	 * Make a list of all ethernet controllers	 * if not already done.	 */	if(ctlrhead == nil){		p = nil;		while(p = pcimatch(p, 0, 0)){			if(p->ccrb != 0x02 || p->ccru != 0)				continue;			ctlr = malloc(sizeof(Ctlr));			ctlr->pcidev = p; 			if(ctlrhead != nil)				ctlrtail->next = ctlr;			else				ctlrhead = ctlr;			ctlrtail = ctlr;		}	} 	/*	 * Is it a card with an unrecognised vid+did?	 * Normally a search is made through all the found controllers	 * for one which matches any of the known vid+did pairs.	 * If a vid+did pair is specified a search is made for that	 * specific controller only.	 */	id = 0;	for(i = 0; i < edev->nopt; i++){		if(cistrncmp(edev->opt[i], "id=", 3) == 0)			id = strtol(&edev->opt[i][3], nil, 0);	} 	if(id != 0)		ne2000match(edev, id);	else for(i = 0; ne2000pci[i].name; i++){		if(ne2000match(edev, ne2000pci[i].id) != nil)			break;	}} /* may be called more than once */intne2000reset(Ether* ether){	ushort buf[16];	ulong port;	Dp8390 *ctlr;	int i;	uchar ea[Eaddrlen]; 	if(ether->port == 0)		ne2000pnp(ether); 	/*	 * port == 0 is a desperate attempt to find something at the	 * default port.  only allow one of these to be found, and	 * only if no other card has been found.	 */	if(ether->port == 0 && ether->ctlrno > 0)		return -1;	/*	 * Set up the software configuration.	 * Use defaults for port, irq, mem and size	 * if not specified.	 */	if(ether->port == 0)		ether->port = 0x300;	if(ether->irq == 0)		ether->irq = 2;	if(ether->mem == 0)		ether->mem = 0x4000;	if(ether->size == 0)		ether->size = 16*1024;	port = ether->port; 	if(inuse(ether->port))		return -1; 	ether->ctlr = malloc(sizeof(Dp8390));	ctlr = ether->ctlr;	ctlr->width = 2;	ctlr->ram = 0; 	ctlr->port = port;	ctlr->data = port+Data; 	ctlr->tstart = HOWMANY(ether->mem, Dp8390BufSz);	ctlr->pstart = ctlr->tstart + HOWMANY(sizeof(Etherpkt), Dp8390BufSz);	ctlr->pstop = ctlr->tstart + HOWMANY(ether->size, Dp8390BufSz); 	ctlr->dummyrr = 1;	for(i = 0; i < ether->nopt; i++){		if(strcmp(ether->opt[i], "nodummyrr"))			continue;		ctlr->dummyrr = 0;		break;	} 	/*	 * Reset the board. This is done by doing a read	 * followed by a write to the Reset address.	 */	buf[0] = inb(port+Reset);	delay(2);	outb(port+Reset, buf[0]);	delay(2);		/*	 * Init the (possible) chip, then use the (possible)	 * chip to read the (possible) PROM for ethernet address	 * and a marker byte.	 * Could just look at the DP8390 command register after	 * initialisation has been tried, but that wouldn't be	 * enough, there are other ethernet boards which could	 * match.	 * Parallels has buf[0x0E] == 0x00 whereas real hardware	 * usually has 0x57.	 */	dp8390reset(ether);	memset(buf, 0, sizeof(buf));	dp8390read(ctlr, buf, 0, sizeof(buf));	i = buf[0x0E] & 0xFF;	if((i != 0x00 && i != 0x57) || (buf[0x0F] & 0xFF) != 0x57){		free(ether->ctlr);		return -1;	} 	/*	 * Stupid machine. Shorts were asked for,	 * shorts were delivered, although the PROM is a byte array.	 * Set the ethernet address.	 */	memset(ea, 0, Eaddrlen);	if(memcmp(ea, ether->ea, Eaddrlen) == 0){		for(i = 0; i < sizeof(ether->ea); i++)			ether->ea[i] = buf[i];	}	dp8390setea(ether);	return 0;}