343 lines · 8.7 KB · C
RawDownload
/* * drivers/clocksource/arm_global_timer.c * * Copyright (C) 2013 STMicroelectronics (R&D) Limited. * Author: Stuart Menefy <stuart.menefy@st.com> * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include <linux/init.h>#include <linux/interrupt.h>#include <linux/clocksource.h>#include <linux/clockchips.h>#include <linux/cpu.h>#include <linux/clk.h>#include <linux/delay.h>#include <linux/err.h>#include <linux/io.h>#include <linux/of.h>#include <linux/of_irq.h>#include <linux/of_address.h>#include <linux/sched_clock.h> #include <asm/cputype.h> #define GT_COUNTER0	0x00#define GT_COUNTER1	0x04 #define GT_CONTROL	0x08#define GT_CONTROL_TIMER_ENABLE		BIT(0)  /* this bit is NOT banked */#define GT_CONTROL_COMP_ENABLE		BIT(1)	/* banked */#define GT_CONTROL_IRQ_ENABLE		BIT(2)	/* banked */#define GT_CONTROL_AUTO_INC		BIT(3)	/* banked */ #define GT_INT_STATUS	0x0c#define GT_INT_STATUS_EVENT_FLAG	BIT(0) #define GT_COMP0	0x10#define GT_COMP1	0x14#define GT_AUTO_INC	0x18 /* * We are expecting to be clocked by the ARM peripheral clock. * * Note: it is assumed we are using a prescaler value of zero, so this is * the units for all operations. */static void __iomem *gt_base;static unsigned long gt_clk_rate;static int gt_ppi;static struct clock_event_device __percpu *gt_evt; /* * To get the value from the Global Timer Counter register proceed as follows: * 1. Read the upper 32-bit timer counter register * 2. Read the lower 32-bit timer counter register * 3. Read the upper 32-bit timer counter register again. If the value is *  different to the 32-bit upper value read previously, go back to step 2. *  Otherwise the 64-bit timer counter value is correct. */static u64 notrace _gt_counter_read(void){	u64 counter;	u32 lower;	u32 upper, old_upper; 	upper = readl_relaxed(gt_base + GT_COUNTER1);	do {		old_upper = upper;		lower = readl_relaxed(gt_base + GT_COUNTER0);		upper = readl_relaxed(gt_base + GT_COUNTER1);	} while (upper != old_upper); 	counter = upper;	counter <<= 32;	counter |= lower;	return counter;} static u64 gt_counter_read(void){	return _gt_counter_read();} /** * To ensure that updates to comparator value register do not set the * Interrupt Status Register proceed as follows: * 1. Clear the Comp Enable bit in the Timer Control Register. * 2. Write the lower 32-bit Comparator Value Register. * 3. Write the upper 32-bit Comparator Value Register. * 4. Set the Comp Enable bit and, if necessary, the IRQ enable bit. */static void gt_compare_set(unsigned long delta, int periodic){	u64 counter = gt_counter_read();	unsigned long ctrl; 	counter += delta;	ctrl = GT_CONTROL_TIMER_ENABLE;	writel_relaxed(ctrl, gt_base + GT_CONTROL);	writel_relaxed(lower_32_bits(counter), gt_base + GT_COMP0);	writel_relaxed(upper_32_bits(counter), gt_base + GT_COMP1); 	if (periodic) {		writel_relaxed(delta, gt_base + GT_AUTO_INC);		ctrl |= GT_CONTROL_AUTO_INC;	} 	ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE;	writel_relaxed(ctrl, gt_base + GT_CONTROL);} static int gt_clockevent_shutdown(struct clock_event_device *evt){	unsigned long ctrl; 	ctrl = readl(gt_base + GT_CONTROL);	ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE |		  GT_CONTROL_AUTO_INC);	writel(ctrl, gt_base + GT_CONTROL);	return 0;} static int gt_clockevent_set_periodic(struct clock_event_device *evt){	gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1);	return 0;} static int gt_clockevent_set_next_event(unsigned long evt,					struct clock_event_device *unused){	gt_compare_set(evt, 0);	return 0;} static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id){	struct clock_event_device *evt = dev_id; 	if (!(readl_relaxed(gt_base + GT_INT_STATUS) &				GT_INT_STATUS_EVENT_FLAG))		return IRQ_NONE; 	/**	 * ERRATA 740657( Global Timer can send 2 interrupts for	 * the same event in single-shot mode)	 * Workaround:	 *	Either disable single-shot mode.	 *	Or	 *	Modify the Interrupt Handler to avoid the	 *	offending sequence. This is achieved by clearing	 *	the Global Timer flag _after_ having incremented	 *	the Comparator register	value to a higher value.	 */	if (clockevent_state_oneshot(evt))		gt_compare_set(ULONG_MAX, 0); 	writel_relaxed(GT_INT_STATUS_EVENT_FLAG, gt_base + GT_INT_STATUS);	evt->event_handler(evt); 	return IRQ_HANDLED;} static int gt_starting_cpu(unsigned int cpu){	struct clock_event_device *clk = this_cpu_ptr(gt_evt); 	clk->name = "arm_global_timer";	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |		CLOCK_EVT_FEAT_PERCPU;	clk->set_state_shutdown = gt_clockevent_shutdown;	clk->set_state_periodic = gt_clockevent_set_periodic;	clk->set_state_oneshot = gt_clockevent_shutdown;	clk->set_state_oneshot_stopped = gt_clockevent_shutdown;	clk->set_next_event = gt_clockevent_set_next_event;	clk->cpumask = cpumask_of(cpu);	clk->rating = 300;	clk->irq = gt_ppi;	clockevents_config_and_register(clk, gt_clk_rate,					1, 0xffffffff);	enable_percpu_irq(clk->irq, IRQ_TYPE_NONE);	return 0;} static int gt_dying_cpu(unsigned int cpu){	struct clock_event_device *clk = this_cpu_ptr(gt_evt); 	gt_clockevent_shutdown(clk);	disable_percpu_irq(clk->irq);	return 0;} static u64 gt_clocksource_read(struct clocksource *cs){	return gt_counter_read();} static void gt_resume(struct clocksource *cs){	unsigned long ctrl; 	ctrl = readl(gt_base + GT_CONTROL);	if (!(ctrl & GT_CONTROL_TIMER_ENABLE))		/* re-enable timer on resume */		writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);} static struct clocksource gt_clocksource = {	.name	= "arm_global_timer",	.rating	= 300,	.read	= gt_clocksource_read,	.mask	= CLOCKSOURCE_MASK(64),	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,	.resume = gt_resume,}; #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCKstatic u64 notrace gt_sched_clock_read(void){	return _gt_counter_read();}#endif static unsigned long gt_read_long(void){	return readl_relaxed(gt_base + GT_COUNTER0);} static struct delay_timer gt_delay_timer = {	.read_current_timer = gt_read_long,}; static void __init gt_delay_timer_init(void){	gt_delay_timer.freq = gt_clk_rate;	register_current_timer_delay(&gt_delay_timer);} static int __init gt_clocksource_init(void){	writel(0, gt_base + GT_CONTROL);	writel(0, gt_base + GT_COUNTER0);	writel(0, gt_base + GT_COUNTER1);	/* enables timer on all the cores */	writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL); #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK	sched_clock_register(gt_sched_clock_read, 64, gt_clk_rate);#endif	return clocksource_register_hz(&gt_clocksource, gt_clk_rate);} static int __init global_timer_of_register(struct device_node *np){	struct clk *gt_clk;	int err = 0; 	/*	 * In A9 r2p0 the comparators for each processor with the global timer	 * fire when the timer value is greater than or equal to. In previous	 * revisions the comparators fired when the timer value was equal to.	 */	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9	    && (read_cpuid_id() & 0xf0000f) < 0x200000) {		pr_warn("global-timer: non support for this cpu version.\n");		return -ENOSYS;	} 	gt_ppi = irq_of_parse_and_map(np, 0);	if (!gt_ppi) {		pr_warn("global-timer: unable to parse irq\n");		return -EINVAL;	} 	gt_base = of_iomap(np, 0);	if (!gt_base) {		pr_warn("global-timer: invalid base address\n");		return -ENXIO;	} 	gt_clk = of_clk_get(np, 0);	if (!IS_ERR(gt_clk)) {		err = clk_prepare_enable(gt_clk);		if (err)			goto out_unmap;	} else {		pr_warn("global-timer: clk not found\n");		err = -EINVAL;		goto out_unmap;	} 	gt_clk_rate = clk_get_rate(gt_clk);	gt_evt = alloc_percpu(struct clock_event_device);	if (!gt_evt) {		pr_warn("global-timer: can't allocate memory\n");		err = -ENOMEM;		goto out_clk;	} 	err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt,				 "gt", gt_evt);	if (err) {		pr_warn("global-timer: can't register interrupt %d (%d)\n",			gt_ppi, err);		goto out_free;	} 	/* Register and immediately configure the timer on the boot CPU */	err = gt_clocksource_init();	if (err)		goto out_irq;		err = cpuhp_setup_state(CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,				"clockevents/arm/global_timer:starting",				gt_starting_cpu, gt_dying_cpu);	if (err)		goto out_irq; 	gt_delay_timer_init(); 	return 0; out_irq:	free_percpu_irq(gt_ppi, gt_evt);out_free:	free_percpu(gt_evt);out_clk:	clk_disable_unprepare(gt_clk);out_unmap:	iounmap(gt_base);	WARN(err, "ARM Global timer register failed (%d)\n", err); 	return err;} /* Only tested on r2p2 and r3p0  */TIMER_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer",			global_timer_of_register);