/* libFLAC - Free Lossless Audio Codec library * Copyright (C) 2000-2009  Josh Coalson * Copyright (C) 2011-2016  Xiph.Org Foundation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * - Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * - Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * - Neither the name of the Xiph.org Foundation nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef FLAC__PRIVATE__LPC_H#define FLAC__PRIVATE__LPC_H #include "../private/float.h"#include "../FLAC/format.h" #ifndef FLAC__INTEGER_ONLY_LIBRARY /* *	FLAC__lpc_window_data() *	-------------------------------------------------------------------- *	Applies the given window to the data. *  OPT: asm implementation * *	IN in[0,data_len-1] *	IN window[0,data_len-1] *	OUT out[0,lag-1] *	IN data_len */void FLAC__lpc_window_data(const FLAC__int32 in[], const FLAC__real window[], FLAC__real out[], uint32_t data_len); /* *	FLAC__lpc_compute_autocorrelation() *	-------------------------------------------------------------------- *	Compute the autocorrelation for lags between 0 and lag-1. *	Assumes data[] outside of [0,data_len-1] == 0. *	Asserts that lag > 0. * *	IN data[0,data_len-1] *	IN data_len *	IN 0 < lag <= data_len *	OUT autoc[0,lag-1] */void FLAC__lpc_compute_autocorrelation(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);#ifndef FLAC__NO_ASM#  ifdef FLAC__CPU_IA32#    ifdef FLAC__HAS_NASMvoid FLAC__lpc_compute_autocorrelation_asm_ia32(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_asm_ia32_sse_lag_4_old(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_asm_ia32_sse_lag_8_old(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_asm_ia32_sse_lag_12_old(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_asm_ia32_sse_lag_16_old(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);#    endif#  endif#  if (defined FLAC__CPU_IA32 || defined FLAC__CPU_X86_64) && FLAC__HAS_X86INTRIN#    ifdef FLAC__SSE_SUPPORTEDvoid FLAC__lpc_compute_autocorrelation_intrin_sse_lag_4_old(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_sse_lag_8_old(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_sse_lag_12_old(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_sse_lag_16_old(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_sse_lag_4_new(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_sse_lag_8_new(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_sse_lag_12_new(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_sse_lag_16_new(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);#    endif#  endif#if defined(FLAC__CPU_PPC64) && defined(FLAC__USE_VSX)#ifdef FLAC__HAS_TARGET_POWER9void FLAC__lpc_compute_autocorrelation_intrin_power9_vsx_lag_4(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_power9_vsx_lag_8(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_power9_vsx_lag_12(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_power9_vsx_lag_16(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);#endif#ifdef FLAC__HAS_TARGET_POWER8void FLAC__lpc_compute_autocorrelation_intrin_power8_vsx_lag_4(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_power8_vsx_lag_8(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_power8_vsx_lag_12(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_intrin_power8_vsx_lag_16(const FLAC__real data[], uint32_t data_len, uint32_t lag, FLAC__real autoc[]);#endif#endif#endif /* *	FLAC__lpc_compute_lp_coefficients() *	-------------------------------------------------------------------- *	Computes LP coefficients for orders 1..max_order. *	Do not call if autoc[0] == 0.0.  This means the signal is zero *	and there is no point in calculating a predictor. * *	IN autoc[0,max_order]                      autocorrelation values *	IN 0 < max_order <= FLAC__MAX_LPC_ORDER    max LP order to compute *	OUT lp_coeff[0,max_order-1][0,max_order-1] LP coefficients for each order *	*** IMPORTANT: *	*** lp_coeff[0,max_order-1][max_order,FLAC__MAX_LPC_ORDER-1] are untouched *	OUT error[0,max_order-1]                   error for each order (more *	                                           specifically, the variance of *	                                           the error signal times # of *	                                           samples in the signal) * *	Example: if max_order is 9, the LP coefficients for order 9 will be *	         in lp_coeff[8][0,8], the LP coefficients for order 8 will be *			 in lp_coeff[7][0,7], etc. */void FLAC__lpc_compute_lp_coefficients(const FLAC__real autoc[], uint32_t *max_order, FLAC__real lp_coeff[][FLAC__MAX_LPC_ORDER], double error[]); /* *	FLAC__lpc_quantize_coefficients() *	-------------------------------------------------------------------- *	Quantizes the LP coefficients.  NOTE: precision + bits_per_sample *	must be less than 32 (sizeof(FLAC__int32)*8). * *	IN lp_coeff[0,order-1]    LP coefficients *	IN order                  LP order *	IN FLAC__MIN_QLP_COEFF_PRECISION < precision *	                          desired precision (in bits, including sign *	                          bit) of largest coefficient *	OUT qlp_coeff[0,order-1]  quantized coefficients *	OUT shift                 # of bits to shift right to get approximated *	                          LP coefficients.  NOTE: could be negative. *	RETURN 0 => quantization OK *	       1 => coefficients require too much shifting for *shift to *              fit in the LPC subframe header.  'shift' is unset. *         2 => coefficients are all zero, which is bad.  'shift' is *              unset. */int FLAC__lpc_quantize_coefficients(const FLAC__real lp_coeff[], uint32_t order, uint32_t precision, FLAC__int32 qlp_coeff[], int *shift); /* *	FLAC__lpc_compute_residual_from_qlp_coefficients() *	-------------------------------------------------------------------- *	Compute the residual signal obtained from sutracting the predicted *	signal from the original. * *	IN data[-order,data_len-1] original signal (NOTE THE INDICES!) *	IN data_len                length of original signal *	IN qlp_coeff[0,order-1]    quantized LP coefficients *	IN order > 0               LP order *	IN lp_quantization         quantization of LP coefficients in bits *	OUT residual[0,data_len-1] residual signal */void FLAC__lpc_compute_residual_from_qlp_coefficients(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);void FLAC__lpc_compute_residual_from_qlp_coefficients_wide(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);#ifndef FLAC__NO_ASM#  ifdef FLAC__CPU_IA32#    ifdef FLAC__HAS_NASMvoid FLAC__lpc_compute_residual_from_qlp_coefficients_asm_ia32(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);void FLAC__lpc_compute_residual_from_qlp_coefficients_asm_ia32_mmx(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);void FLAC__lpc_compute_residual_from_qlp_coefficients_wide_asm_ia32(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);#    endif#  endif#  if (defined FLAC__CPU_IA32 || defined FLAC__CPU_X86_64) && FLAC__HAS_X86INTRIN#    ifdef FLAC__SSE2_SUPPORTEDvoid FLAC__lpc_compute_residual_from_qlp_coefficients_16_intrin_sse2(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);void FLAC__lpc_compute_residual_from_qlp_coefficients_intrin_sse2(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);#    endif#    ifdef FLAC__SSE4_1_SUPPORTEDvoid FLAC__lpc_compute_residual_from_qlp_coefficients_intrin_sse41(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);void FLAC__lpc_compute_residual_from_qlp_coefficients_wide_intrin_sse41(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);#    endif#    ifdef FLAC__AVX2_SUPPORTEDvoid FLAC__lpc_compute_residual_from_qlp_coefficients_16_intrin_avx2(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);void FLAC__lpc_compute_residual_from_qlp_coefficients_intrin_avx2(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);void FLAC__lpc_compute_residual_from_qlp_coefficients_wide_intrin_avx2(const FLAC__int32 *data, uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 residual[]);#    endif#  endif#endif #endif /* !defined FLAC__INTEGER_ONLY_LIBRARY */ /* *	FLAC__lpc_restore_signal() *	-------------------------------------------------------------------- *	Restore the original signal by summing the residual and the *	predictor. * *	IN residual[0,data_len-1]  residual signal *	IN data_len                length of original signal *	IN qlp_coeff[0,order-1]    quantized LP coefficients *	IN order > 0               LP order *	IN lp_quantization         quantization of LP coefficients in bits *	*** IMPORTANT: the caller must pass in the historical samples: *	IN  data[-order,-1]        previously-reconstructed historical samples *	OUT data[0,data_len-1]     original signal */void FLAC__lpc_restore_signal(const FLAC__int32 residual[], uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 data[]);void FLAC__lpc_restore_signal_wide(const FLAC__int32 residual[], uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 data[]);#ifndef FLAC__NO_ASM#  ifdef FLAC__CPU_IA32#    ifdef FLAC__HAS_NASMvoid FLAC__lpc_restore_signal_asm_ia32(const FLAC__int32 residual[], uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 data[]);void FLAC__lpc_restore_signal_asm_ia32_mmx(const FLAC__int32 residual[], uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 data[]);void FLAC__lpc_restore_signal_wide_asm_ia32(const FLAC__int32 residual[], uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 data[]);#    endif /* FLAC__HAS_NASM */#  endif /* FLAC__CPU_IA32 */#  if (defined FLAC__CPU_IA32 || defined FLAC__CPU_X86_64) && FLAC__HAS_X86INTRIN#    ifdef FLAC__SSE4_1_SUPPORTEDvoid FLAC__lpc_restore_signal_intrin_sse41(const FLAC__int32 residual[], uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 data[]);void FLAC__lpc_restore_signal_16_intrin_sse41(const FLAC__int32 residual[], uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 data[]);void FLAC__lpc_restore_signal_wide_intrin_sse41(const FLAC__int32 residual[], uint32_t data_len, const FLAC__int32 qlp_coeff[], uint32_t order, int lp_quantization, FLAC__int32 data[]);#    endif#  endif#endif /* FLAC__NO_ASM */ #ifndef FLAC__INTEGER_ONLY_LIBRARY /* *	FLAC__lpc_compute_expected_bits_per_residual_sample() *	-------------------------------------------------------------------- *	Compute the expected number of bits per residual signal sample *	based on the LP error (which is related to the residual variance). * *	IN lpc_error >= 0.0   error returned from calculating LP coefficients *	IN total_samples > 0  # of samples in residual signal *	RETURN                expected bits per sample */double FLAC__lpc_compute_expected_bits_per_residual_sample(double lpc_error, uint32_t total_samples);double FLAC__lpc_compute_expected_bits_per_residual_sample_with_error_scale(double lpc_error, double error_scale); /* *	FLAC__lpc_compute_best_order() *	-------------------------------------------------------------------- *	Compute the best order from the array of signal errors returned *	during coefficient computation. * *	IN lpc_error[0,max_order-1] >= 0.0  error returned from calculating LP coefficients *	IN max_order > 0                    max LP order *	IN total_samples > 0                # of samples in residual signal *	IN overhead_bits_per_order          # of bits overhead for each increased LP order *	                                    (includes warmup sample size and quantized LP coefficient) *	RETURN [1,max_order]                best order */uint32_t FLAC__lpc_compute_best_order(const double lpc_error[], uint32_t max_order, uint32_t total_samples, uint32_t overhead_bits_per_order); #endif /* !defined FLAC__INTEGER_ONLY_LIBRARY */ #endif